Twilight Floral Embrace

Invite a moody garden into your home with Twilight Floral Embrace, a removable wallpaper that wraps your space in layered blooms and dusk-kissed tones. This renter-friendly, peel-and-stick design refreshes walls without the commitment—perfect for bedrooms, living rooms, nurseries, and statement nooks.

Key Features

• Removable, peel-and-stick wallpaper that installs cleanly and removes with ease.
• PVC-free material printed with eco-friendly, water-based inks.
• Rolls are 24 inches wide and available in heights up to 120 inches for a custom fit.
• Matte, glare-reducing finish showcases rich, fade-resistant color.
• Designed for smooth, painted walls, doors, and furniture accents.
• Low-odor and phthalate-free for a fresher home update.

How to Measure

1. Measure your wall’s width and height in inches.
2. Each panel covers 24 inches in width; divide total wall width by 24 to determine panel count. Round up to the next whole panel.
3. Select the panel height that is equal to or slightly taller than your wall height (up to 120 inches) to allow for trimming at the ceiling and baseboard.
4. Order all panels for a wall at the same time to ensure consistent color.

Installation Guidance

1. Prep the wall: Ensure it is smooth, fully cured (wait 30 days after painting), clean, and dry. Avoid freshly primed, Teflon- or silicone-based, or heavily textured surfaces.
2. Plan your layout: Start at a plumb line on the left or most visible edge of the wall.
3. Peel and position: Peel 6–8 inches of backing from the first panel, align at the top, and lightly tack in place.
4. Smooth as you go: Using a felt squeegee or soft cloth, press from the center outward while slowly removing the rest of the backing. Work downward to prevent bubbles.
5. Match the pattern: Hang subsequent panels edge-to-edge or with a slight overlap as needed, aligning the floral repeat.
6. Trim and finish: Use a sharp utility knife and straightedge to trim at ceilings, baseboards, and around outlets. A second person helps with alignment.

Care and Removability

• Wipe clean with a soft, damp, lint-free cloth as needed.
• Avoid harsh chemicals, bleach, or abrasive scrubbers.
• To remove, gently lift a corner and peel back slowly at a low angle. If resistance occurs, warm the panel slightly and continue peeling.

Good to Know

• Colors may vary slightly by monitor and wall paint; test a small area when possible.
• Best results on smooth, eggshell-to-semi-gloss painted surfaces. Not recommended for high-texture walls or high-moisture areas without adequate ventilation.