Urban Canvas Electric Dream

Bring modern city energy to your space with a bold, removable wallpaper designed to make a statement and still play nice with your walls. Each roll is 24 inches wide and available in heights up to 120 inches for a custom-tailored fit. Printed on PVC-free material with eco-friendly, water-based inks, Urban Canvas Electric Dream delivers vivid detail with a smooth, matte finish that’s made for everyday living.

Key Features

• Removable, renter-friendly wallcovering for accent walls, bedrooms, offices, and creative spaces.
• Roll size: 24 in W; choose heights up to 120 in to match your wall.
• PVC-free substrate printed with water-based inks for a low-odor, eco-conscious finish.
• Smooth, matte surface for crisp color and reduced glare.
• Made for indoor, smooth, properly painted walls.

Installation Guidance

1. Measure and plan: Measure your wall height and select the roll height equal to or slightly above it (allow 1–2 inches for trim). Determine the number of rolls by dividing your wall width (in inches) by 24; round up.
2. Prep the surface: Ensure walls are smooth, clean, dry, and fully cured (typically 30 days after painting). Remove dust and oils. Avoid heavy texture, high-moisture areas, and flaking paint.
3. Mark a plumb line: Use a level to mark a vertical guide where your first panel will go.
4. Apply the first panel: Starting at the top, peel back 6–12 inches of the liner and align to your plumb line. Smooth downward with a squeegee or soft cloth, peeling more liner as you go to release air bubbles.
5. Align subsequent panels: Butt the seams edge-to-edge without overlap. Do not stretch the material; lift and readjust as needed for a tight seam.
6. Trim and finish: Use a sharp blade and straightedge to trim excess at ceilings, baseboards, and around outlets (turn power off before trimming around electrical points).
7. Settle time: Allow 24 hours for full adhesion. Maintain a dry, room-temperature environment during and after install.

Care Instructions

• Wipe gently with a soft, damp cloth; use mild soap if needed.
• Avoid abrasive scrubbers, harsh chemicals, steam, or excessive heat.
• For removal, peel slowly from a top corner at a low angle; warm the surface slightly with a hair dryer if needed to ease release.

Good to Know

• Best on smooth, non-textured, properly primed and painted walls (eggshell or satin finishes typically perform best).
• Color appearance may vary by screen and lighting; order enough in one batch for the best panel match.