Urban Expressionist Splash Wallpaper

Make a bold statement with an artful burst of color and movement. Urban Expressionist Splash Wallpaper brings gallery-worthy energy to your space while staying renter-friendly and easy to live with. Our removable wall covering is PVC-free and printed with eco-friendly, water-based inks for a fresh, low-odor finish.

Key Features

• Modern, abstract expressionist design that enlivens living rooms, bedrooms, offices, and creative spaces.
• Removable and renter-friendly for simple updates without long-term commitment.
• PVC-free material printed with eco-friendly, water-based inks.
• Matte, glare-minimizing finish with crisp, high-resolution detail.
• Made for smooth, properly painted walls; designed for clean removal from most surfaces.

Size & Fit

Each roll measures 24 inches wide and up to 120 inches high. Choose a height that matches your wall for a floor-to-ceiling look.

• How many rolls do I need? Measure your wall width in inches, divide by 24, then round up to the next whole number.
• For pattern continuity, order all rolls at the same time and add 5–10% extra for trimming.

Installation Guidance

1. Acclimate the rolls flat in the room for 24 hours before installing.
2. Prepare the wall: it should be smooth, clean, dry, and fully cured (fresh paint needs at least 30 days). Remove dust and outlet covers.
3. Mark a plumb vertical line to start your first roll.
4. Peel back 6–10 inches of the liner and apply the top of the first roll, aligning to your plumb line.
5. Smooth downward with a felt-edge squeegee, working from the center out. Continue peeling the liner in sections as you go.
6. Install the next roll edge-to-edge with a tight butt seam; do not overlap. Match the pattern carefully.
7. Trim excess at ceilings, baseboards, and around outlets with a sharp utility knife.
8. Press along seams and allow 24 hours for the adhesive to set.

Tools recommended: tape measure, level, pencil, felt-edge squeegee, sharp utility knife, step stool.

Care Instructions

• Wipe with a soft, damp cloth; use mild soap only if needed.
• Avoid abrasives, bleach, or harsh chemicals.
• For best results, avoid high humidity and steam-prone areas.
• If removing, peel back slowly at a low angle; warming with a hairdryer can help release the adhesive.

Good to Know

• PVC-free substrate and eco-friendly, water-based inks.
• Performs best on smooth, properly primed and painted walls; not recommended for heavy texture or surfaces treated with stain-resistant or “washable” paints that repel adhesives.