Urban Forge Corrugated Wall

Bring urban loft character to your space with a realistic, faux corrugated metal look—without the weight or permanence of real steel. This removable wallpaper delivers an industrial vibe that’s modern, refined, and renter-friendly.

PVC-free and printed with eco-friendly, water-based inks.

Key Features

Removable, renter-friendly wallpaper with a convincing corrugated metal effect.
Low-glare, richly detailed print that adds depth and texture to walls.
Panels are 24 inches wide and available in custom heights up to 120 inches.
Applies best to smooth, clean, properly painted walls; removes cleanly from most surfaces.
PVC-free material printed with eco-conscious, water-based inks for low odor and an earth-friendlier finish.

Sizing & Ordering

Measure your wall width in inches and divide by 24 to calculate the number of panels; always round up.
Select a panel height equal to or slightly taller than your wall, then trim excess during installation.
For best results, add 2–4 inches to both width and height to account for wall irregularities and trimming.
Panels are designed to hang edge-to-edge (no overlap) for a continuous, aligned look.

Installation Guidance

This product is designed for straightforward DIY installation on smooth, painted walls.

Unroll panels and allow them to relax flat before installing.
Prep the surface: walls must be clean, dry, smooth, and fully cured (fresh paint should cure for at least 30 days).
Mark a straight, plumb reference line to guide your first panel.
Starting at the top, align the first panel to your plumb line. Peel back a small section of the backing and adhere, smoothing as you go.
Use a felt squeegee or soft cloth to smooth from the center outward, removing air bubbles.
Continue down the wall, gradually removing backing and smoothing. Butt seams edge-to-edge for a seamless pattern.
Trim excess at ceiling, baseboards, and around outlets with a sharp blade.
To remove, slowly peel from a top corner at a low angle.

Care Instructions

Wipe gently with a damp, lint-free cloth; a small amount of mild soap may be used if needed.
Avoid abrasives, bleach, and solvent cleaners.
Suitable for low to moderate humidity; avoid direct water contact and high steam areas.
Test cleaning methods on a small, inconspicuous area first.

Fit & Surface Notes

Best on smooth, eggshell to satin painted walls. Not recommended for heavy texture, brick, stucco, or flaking paint.
Certain stain-blocking or low-surface-energy paints may affect adhesion; applying a compatible primer can help.
Color and scale can vary by screen—consider ordering a sample to view in your lighting.