Urban Forge Rusted Steel Panels

Bring industrial warmth to your space with a realistic rusted-steel look—without the weight or permanence of metal. Urban Forge Rusted Steel Panels is a premium removable wallpaper designed for effortless style in living rooms, bedrooms, offices, and creative studios. Printed on PVC-free material with eco-friendly, water-based inks, it delivers a refined matte finish and authentic texture effect that elevates any modern interior.

Key Features

• Authentic rusted steel aesthetic with rich, layered patina and subtle texture effects
• Removable, renter-friendly design that’s easy to install and clean
• Each roll is 24 inches wide and available in heights up to 120 inches
• PVC-free substrate printed with eco-friendly, water-based inks
• Matte, low-glare finish for a sophisticated, photo-real look
• Butt-seam alignment for a near-seamless wall-to-wall panel effect
• Ideal for accent walls, entryways, headboards, and office backdrops

Sizing and Coverage

• Roll width: 24 in (61 cm)
• Roll height options: Up to 120 in (305 cm)
• How many rolls do I need? Measure your wall width in inches and divide by 24. Always round up and add extra for pattern alignment and trimming.
• Choose the roll height that meets or slightly exceeds your wall height to allow clean trimming at the ceiling and baseboard.

What’s Included

• Your selected number of wallpaper rolls, each 24 in wide in the height you choose (up to 120 in)
• Printed on premium PVC-free material with water-based inks

Installation Guidance

1. Prepare the wall: Ensure the surface is smooth, clean, dry, and fully cured. Repair bumps or cracks; remove dust, grease, and loose paint.
2. Plan your layout: Mark a plumb vertical line where your first panel will go. Start from the most visible edge of the wall.
3. Hang the first roll: Align the top of the panel with your plumb line and ceiling. Smooth downward, working from the center out to remove air bubbles.
4. Seam the next panel: Butt edges carefully without overlapping. Match the printed panel effect for a consistent look.
5. Trim excess: Use a sharp blade and straightedge to trim at the ceiling, baseboard, and around outlets or fixtures.
6. Reposition if needed: Adjust gently to perfect alignment.
7. Removal: Lift a corner and peel back slowly at a low angle. Any residual tack can be cleaned from the wall with mild soap and water.

Care Instructions

• Dust regularly with a dry microfiber cloth.
• Spot clean with a lightly damp cloth and mild soap if necessary. Do not scrub with abrasives or harsh chemicals.
• Avoid direct contact with high heat, excessive moisture, or steam-heavy areas.
• Best results on smooth, properly primed and painted walls; heavy texture may reduce adhesion and visual quality.

Sustainably made on PVC-free material and printed with water-based inks for a beautiful, low-impact finish.