Urban Patina Concrete Panels

Bring the look of hand-formed concrete into your space—minus the weight and mess. Urban Patina Concrete Panels is a removable wallpaper that delivers industrial warmth with soft, weathered texture and vertical panel lines. It installs cleanly, removes without damage, and is made with materials you can feel good about.

Key Features

• Removable and renter-friendly: Installs in minutes, peels off cleanly when it’s time for a change.
• PVC-free and printed with eco-friendly, water-based inks.
• Matte, non-reflective finish that mimics poured concrete with subtle patina.
• Panels are easy to handle: 24 inches wide and up to 120 inches high.
• Designed to align across panels for a seamless, continuous look.
• Low-odor print process for comfortable indoor use.

Sizing and Planning

• Each roll/panel is 24 in W x your chosen length (up to 120 in H).
• Measure your wall height and select the nearest length equal to or slightly longer than your wall.
• To estimate quantity, divide your wall width by 24 inches and round up to the next whole number.
• Best on smooth, clean, dry, and properly primed/painted walls. Not recommended for heavy texture or unsealed surfaces.

Installation Guide

1. Prep: Clean the wall with a damp, lint-free cloth and let dry. Fresh paint should cure for at least 30 days.
2. Mark: Use a level to draw a light, vertical guide line where your first panel will sit.
3. Apply: Peel 8–12 inches of backing and position the top of the panel. Smooth downward with a felt squeegee or soft cloth, working from the center outward.
4. Continue: Peel more backing in sections, smoothing as you go. Avoid stretching the material.
5. Align: Place the next panel edge-to-edge with the first, aligning the design for a near-invisible seam.
6. Finish: Trim excess at ceiling, baseboard, and around outlets with a sharp blade. Allow 24 hours for full bond.

Tip: If needed, gently lift and reposition during install. For removal, peel slowly from a top corner; warming the panel slightly can ease release.

Care

• Wipe with a soft, damp cloth; mild soap if necessary.
• Avoid abrasive scrubbers, bleach, and solvent cleaners.
• Suitable for normal living areas; for bathrooms, ensure good ventilation and avoid direct, continuous water contact.

Good to Know

• Color may vary slightly between batches; order panels for a project at the same time for best match.
• Adhesion can vary by paint type and wall condition; test a small area if unsure.