Urban Slate Concrete Panels

Bring modern, industrial character to your space with Urban Slate Concrete Panels. This removable wallpaper captures the raw beauty of poured concrete—minus the weight and mess. Printed on a premium, PVC-free material with eco-friendly, water-based inks, it delivers a sophisticated, matte finish that elevates living rooms, bedrooms, offices, and entryways.

Key Features

• PVC-free and printed with eco-friendly, water-based inks
• Removable and repositionable for easy, renter-friendly updates
• Matte, non-reflective finish with a realistic slate-concrete look
• Rolls are 24 inches wide; heights available up to 120 inches
• Designed for smooth, properly painted walls; seamless edge-to-edge alignment
• Low-odor, solvent-free print process suitable for homes and offices

Sizing & Coverage

Each roll covers 24 inches in width. Choose a height that matches your wall (up to 120 inches). For a full wall, measure its total width and divide by 24 to determine how many rolls you need, then round up.

• Example: A 10 ft (120 in) wide wall needs 5 rolls (120 ÷ 24 = 5).
• Order a height equal to or slightly taller than your wall to allow trimming at the top and bottom.

Installation Guidance

1. Ensure the wall is smooth, clean, dry, and fully cured (fresh paint should cure for at least 30 days).
2. Gather tools: measuring tape, level, pencil, sharp utility knife, and a smoothing tool or clean cloth.
3. Start at the top. Peel back 6–12 inches of the liner, align to your plumb line, and press firmly.
4. Work downward, peeling the liner a little at a time while smoothing to remove air bubbles.
5. Butt-join the next panel edge-to-edge, aligning the design for a seamless look.
6. Trim excess along ceilings, baseboards, and around outlets. For outlets/switches, turn off power before trimming.
7. Allow 24 hours for full adhesion. If needed, gently lift and reposition during install.

Care & Maintenance

• Wipe gently with a soft, damp cloth; a mild soap solution can be used for spots.
• Avoid abrasives, bleach, and harsh chemicals.
• Suitable for well-ventilated areas; avoid direct water exposure and high humidity zones.

Good to Know

• Best on smooth, eggshell-to-semi-gloss painted surfaces. Not recommended for heavy texture, fresh paint, or stain-resistant/low-VOC paints that repel adhesives.
• For removal, peel slowly at a low angle. Warming with a hair dryer can make removal easier.
• Request or test a sample first if you’re unsure of wall compatibility.