Urban Weaver's Grid Wallpaper

Bring modern order to your space with Urban Weaver's Grid Wallpaper—an elevated, geometric wall covering that layers clean lines and subtle texture for a calm, contemporary look. This removable, renter-friendly wallpaper is PVC-free and printed with eco-friendly, water-based inks for a beautiful finish you can feel good about.

Key Features

• Modern grid pattern that adds structure and depth without overwhelming your room.
• Removable and renter-friendly—designed to come down cleanly when it’s time for a change.
• PVC-free material printed with eco-friendly, water-based inks and low odor.
• Matte, non-glare finish that photographs well and looks premium in any light.
• Rolls are 24 inches wide with selectable heights up to 120 inches for a tailored fit.
• Butt-seam design for a near-seamless look when panels are aligned edge-to-edge.
• Durable surface resists stretching during install and everyday handling.

Sizing and Coverage

Each roll is 24 inches (61 cm) wide. Choose a height that meets or slightly exceeds your wall height (up to 120 inches / 305 cm) to allow for trimming at the top and baseboards.

• To estimate quantity: total wall width in inches ÷ 24 = number of panels needed. Round up and add an extra panel for pattern alignment and contingencies.
• Order all panels at the same time for the most consistent color across your wall.

Installation Guidance

• Install on smooth, clean, dry, and fully cured painted walls (allow new paint to cure for at least 30 days).
• Recommended tools: measuring tape, level, pencil, squeegee or soft cloth, sharp utility knife, and step stool.

1. Wipe the wall to remove dust. Ensure the surface is non-textured and free of grease or residue.
2. Mark a plumb line with a level where your first panel will go—this keeps the grid true from the start.
3. Starting at the top, peel back 6–8 inches of the liner and position the panel along the plumb line.
4. Smooth downward and outward as you slowly remove the liner, working out air bubbles as you go. Do not stretch the material.
5. Apply subsequent panels edge-to-edge (butt seams), checking alignment of the grid and adjusting as needed.
6. Trim excess at ceiling, baseboards, and around outlets with a sharp blade.

Care Instructions

• Wipe clean with a soft, damp cloth; a small amount of mild soap may be used if needed.
• Avoid harsh chemicals, abrasives, or heavy scrubbing.
• For best longevity, avoid direct water exposure and sustained high humidity.

Good to Know

• Best results on smooth, primed, eggshell or satin-painted walls. Not recommended for textured, freshly painted, or high-moisture surfaces.
• Color may vary slightly between print batches; measure and order once for a single project.
• Always test a small area to confirm adhesion and surface compatibility.