Venetian Crimson Brocade Wallpaper

Elevate your space with the timeless richness of Venetian-inspired brocade. This deep crimson removable wallpaper brings old-world elegance to modern interiors, adding depth, warmth, and refined pattern to living rooms, bedrooms, dining spaces, and entryways.

Key Features

• Removable and renter-friendly: Easy to apply, reposition during install, and remove cleanly from most properly painted walls.
• Eco-conscious: PVC-free substrate printed with eco-friendly, water-based inks.
• Premium look, smooth feel: Crisp detail and a sophisticated, low-sheen finish that complements classic and contemporary decor.
• Sized for real homes: 24 in wide rolls, available in heights up to 120 in to fit standard and tall walls.
• Versatile: Ideal for accent walls, full-room wraps, and furniture or cabinet refreshes on smooth, non-textured surfaces.

Sizing

Each roll is 24 inches wide. Choose your roll height up to 120 inches to match your wall. For a clean, custom fit, measure wall height and allow an extra 1–2 inches for trimming at the ceiling and baseboard. To cover wider areas, place rolls edge-to-edge (butt seam) across the wall.

Care & Maintenance

• Wipe gently with a soft, damp cloth; use mild soap if needed.
• Avoid harsh cleaners, bleach, and abrasive pads.
• Do not scrub seams; blot spills promptly.
• For long-lasting color, avoid prolonged direct sunlight where possible.

Installation Guide

1. Prepare the surface: Apply to smooth, clean, dry, and fully cured painted walls. Avoid heavy texture, brick, or rough surfaces. Fresh paint should cure for at least 30 days.
2. Plan your layout: Mark a straight vertical guideline using a level where your first panel will start.
3. Peel and position: Peel back the top of the liner and align the panel at the ceiling, using your guideline for accuracy.
4. Smooth as you go: Working downward, peel 8–12 inches of backing at a time and smooth with a squeegee or soft cloth from center outward to remove air bubbles.
5. Match the pattern: Install subsequent panels edge-to-edge, aligning the brocade motif for a seamless look.
6. Trim edges: Use a sharp utility knife to trim excess along ceilings, baseboards, and around outlets.
7. Adjust if needed: If misaligned, gently lift and reposition. Avoid stretching the material.
8. Settle time: Allow 24 hours for adhesion to set. For removal, peel slowly at a low angle.

Good to Know

• Best on smooth, semi-gloss or satin painted walls free of dust, grease, and moisture.
• High humidity and extreme heat may affect adhesion; ensure surfaces are completely dry.
• Test a small area if you have specialty paints or coatings.