Vibrant Festival Rhapsody

Bring joyful energy to your space with Vibrant Festival Rhapsody, a removable wallpaper designed to spark creativity and color. This renter-friendly wall covering transforms living rooms, nurseries, entryways, and home offices with an artful burst of pattern—then removes cleanly when you’re ready for a refresh.

Key Features

• Removable and renter-friendly: Applies smoothly and removes without damage from most painted walls.
• Eco-conscious by design: PVC-free material printed with eco-friendly, water-based inks for low-odor, family-friendly decorating.
• Custom-fit panels: Rolls are 24 inches wide with heights available up to 120 inches for a tailored, floor-to-ceiling look.
• Seamless finish: Edge-to-edge installation creates a continuous pattern with crisp, vibrant color.
• Versatile style: A lively, festival-inspired motif that elevates modern, eclectic, and playful interiors.

Sizing & Coverage

• Each roll is 24 in (61 cm) wide.
• Choose your height up to 120 in (305 cm) to match your wall.
• Measure your wall width, divide by 24 in, and round up to determine how many panels you need.
• For pattern alignment and trimming, consider adding one extra panel as a safety margin.

Installation Guidance

1. Prep the wall: Ensure the surface is smooth, clean, dry, and fully cured (new paint should cure for at least 30 days). Fill holes and sand lightly. Avoid heavily textured or porous surfaces.
2. Plan your layout: Mark a plumb vertical guideline for your first panel using a level. Lay out panels in order to match the pattern.
3. Apply the first panel: Starting at the top, peel back a small section of the liner. Align to your guideline and smooth downward with a squeegee or soft cloth, working from the center outward.
4. Continue and align: Apply the next panel edge-to-edge (do not overlap unless specified), aligning the pattern as you go. If needed, gently lift and reposition.
5. Trim and finish: Use a sharp blade to trim at ceilings, baseboards, and around outlets. Firmly smooth seams and edges. Allow 24 hours for full adhesion.

Care & Maintenance

• Wipe with a soft, damp cloth. For marks, use mild, non-abrasive soap and water.
• Avoid harsh chemicals, bleach, or abrasive scrubbers.
• Best on low-humidity, well-ventilated walls; prolonged steam or moisture may affect adhesion.
• Test in an inconspicuous area if walls have stain-resistant or Teflon-type paints, which can reduce stick.

Good to Know

• Material is PVC-free and printed with eco-friendly, water-based inks.
• Designed for smooth, primed, painted surfaces; not recommended for heavy texture or unsealed surfaces.
• Ordering a sample is recommended to test color and adhesion in your space.