Vintage Urban Loft Brick Wallpaper

Bring the character of an exposed-brick loft to any room—no demolition, dust, or commitment. This removable wallpaper delivers an authentic brick look with a modern, matte finish that’s perfect for renters, DIYers, and design-forward homes.

Key Features

• Authentic urban brick aesthetic for instant industrial loft vibes
• Removable design for an easy, damage-minimizing refresh
• Rolls are 24 inches wide and available in heights up to 120 inches
• PVC-free material printed with eco-friendly, water-based inks
• Low-odor, low-VOC printing suitable for indoor spaces
• Matte, glare-free finish that photographs beautifully
• DIY-friendly with clean seams when panels are butted edge-to-edge
• Best on smooth, properly primed and painted interior walls

Sizing and Coverage

Each roll covers a 24-inch-wide section of wall and can be ordered up to 120 inches high to fit most ceilings.

• Measure your wall height and select a roll height that meets or slightly exceeds it; trim the excess after installation.
• To estimate quantity: divide your wall width (in inches) by 24, then round up to the next whole number.
• Allow extra for trimming and pattern alignment; ordering all panels for a project in one batch helps ensure color consistency.

Installation Guidance

1. Prep the wall: Ensure surfaces are smooth, clean, dry, and fully cured (fresh paint should cure for 30 days). Avoid textured walls, brick, or surfaces with heavy moisture.
2. Plan your layout: Mark a plumb vertical line for the first panel using a level; arrange panels left to right for an even pattern reveal.
3. Apply the first panel: Align to your plumb line. Follow your wallpaper’s adhesive directions (self-adhesive: peel a small section of the liner at the top and smooth downward; paste-applied: use recommended paste and technique).
4. Smooth and align: Use a felt squeegee or soft cloth to remove air and ensure a flat bond. Do not stretch the material.
5. Hang additional panels: Butt edges—not overlap—for clean seams. Match the brick pattern as you go.
6. Trim and finish: Carefully trim along ceilings, baseboards, and around outlets with a sharp blade. Change blades frequently for crisp cuts.
7. Set time: Let the installation rest 24 hours before wiping or placing wall-mounted items.

Care Instructions

• Wipe gently with a soft, damp cloth; add a small amount of mild soap for tougher spots.
• Avoid abrasive pads, bleach, or ammonia-based cleaners.
• Use in dry, well-ventilated interiors; prolonged high humidity may affect adhesion.
• To remove, peel back slowly at a low angle. If walls were not properly primed/painted, minor touch-ups may be needed.

Eco-Conscious by Design

All of our wallpapers are PVC-free and printed with eco-friendly, water-based inks—safer for your home and the environment, without compromising color or detail.