Warm Dune Contours

Transform your space with soft, sand-inspired waves in warm neutral tones. Warm Dune Contours brings a calm, organic flow to bedrooms, living rooms, nurseries, hallways, and home offices—designed as a renter-friendly, peel-and-stick removable wallpaper.

Key Features

• Rolls measure 24 inches wide and up to 120 inches high for easy planning and minimal seams.
• PVC-free substrate printed with eco-friendly, water-based inks.
• Removable and repositionable during installation; great for renters and refreshes.
• Low-odor, matte finish to reduce glare and enhance the design’s soft contours.
• Ideal for smooth, painted walls, doors, and other flat, non-textured surfaces.

Before You Order

• Measure wall height and choose a panel height up to 120 inches. Add a little extra for trimming at ceiling and baseboard.
• Order enough panels for the full width of your wall (each panel is 24 inches wide).
• Color can vary by screen; consider testing with a sample on your wall and lighting.

Care Instructions

• Wipe gently with a soft, damp cloth; use mild soap if needed.
• Avoid abrasive scrubbers, bleach, or solvent-based cleaners.
• Keep away from sustained moisture and direct heat sources.

Installation Guidance

1. Prep the wall: Ensure it’s smooth, clean, and fully dry. Newly painted walls should cure for at least 30 days. Avoid textured, dusty, or damp surfaces.
2. Plan your layout: Start from a plumb line using a level. Unroll and dry-fit the first panel to confirm placement.
3. Peel and place: Peel 6–10 inches of backing, align the top, and stick lightly. Work downward in sections.
4. Smooth: Use a felt squeegee or soft cloth to press out air, moving from center to edges.
5. Trim: Use a sharp utility knife along ceiling, baseboards, and around outlets.
6. Repeat: Align the next 24-inch panel edge-to-edge. Slightly overlap only if needed to match the design.
7. Settle: Allow 24 hours for full adhesion. To remove later, peel slowly at a 180° angle.

Good to Know

• Adheres best to eggshell, satin, or semi-gloss paint on smooth drywall.
• Not recommended for heavy texture, brick, stucco, or areas with high humidity.
• Removes cleanly from most properly primed, painted walls when installed as directed.

Sustainably made: always PVC-free and printed with eco-friendly, water-based inks.