Weathered City Loft Brick

Bring the character of a converted loft to your space with a realistic brick look—no dust, no demo. Weathered City Loft Brick is a removable wallpaper designed for renters, refreshers, and anyone who wants urban texture with zero commitment. Our wallpaper is PVC-free and printed with eco-friendly, water-based inks for a low-odor, home-safe finish.

Key Features

• Authentic weathered brick design for a warm, industrial-modern vibe
• Removable and rental-friendly—refresh your space without permanent changes
• PVC-free material printed with eco-friendly, water-based inks
• Matte, glare-free finish that looks like a painted surface
• Rolls are 24 inches wide and available in heights up to 120 inches
• Great for accent walls, entryways, bedrooms, offices, and studios

Sizing & Coverage

Each roll is 24 inches wide and up to 120 inches high (maximum coverage up to 20 sq ft per roll at full height). Measure your wall width and divide by 24 inches to estimate how many panels you’ll need. Allow extra for trimming and pattern alignment.

Surface Compatibility

• Best on smooth, clean, dry, non-textured walls painted with eggshell, satin, or semi-gloss
• Not recommended on textured walls, raw drywall, unsealed surfaces, or high-moisture zones
• Wait at least 30 days after painting before installation

Installation Guidance

Tools you may find helpful: measuring tape, level or plumb line, smoothing tool, sharp utility knife, step stool, microfiber cloth.

1. Prep: Clean the wall with mild soap and water, rinse, and let dry. Repair and smooth any imperfections.
2. Plan: Mark a straight, plumb starting line. Dry-fit the first panel to confirm height and pattern alignment.
3. Apply: Starting at the top, align the panel and work downward, smoothing outward to remove air. Depending on adhesive type, either peel the liner gradually as you go or apply adhesive per product instructions.
4. Seams: Install panels edge-to-edge (butt seams), aligning the brick pattern for a continuous look.
5. Trim: Use a sharp blade to trim at ceilings, baseboards, and around outlets. Replace blades often for clean cuts.
6. Settle: Re-smooth seams and allow the wallpaper to settle for 24 hours at room temperature.

Care & Removal

• Wipe clean with a soft, damp cloth; a small amount of mild soap is fine
• Avoid abrasives, bleach, and excessive scrubbing
• To remove, lift a corner and peel back slowly at a low angle; gently warming the panel can help release on delicate paints

Sustainability

Made without PVC and printed with eco-friendly, water-based inks to reduce indoor emissions and support a healthier home.