Whimsical Viking Sea Adventure

Set sail on a storybook voyage. Whimsical Viking Sea Adventure brings charming longships, friendly sea creatures, and playful Nordic motifs to your space—perfect for kids’ rooms, nurseries, playrooms, or any nook that craves imaginative energy. This removable wallpaper transforms walls in hours and removes cleanly when it’s time for a new journey.

Key Features

• Removable and renter-friendly: Designed for easy, non-permanent updates.
• Eco-conscious materials: PVC-free substrate printed with eco-friendly, water-based inks.
• Low-odor, family-friendly print process for indoor spaces.
• Size you can customize: Each roll is 24 inches wide; choose the length your wall needs, up to 120 inches.
• Smooth, matte finish that reduces glare and highlights artwork detail.
• Designed to tile across panels for a seamless, story-like mural feel.

Measuring & Sizing

Use these quick steps to determine how many rolls you need:

1. Measure your wall width in inches.
2. Divide by 24 (the roll width) and round up to the next whole number to get your panel count.
3. Measure wall height and add 2–4 inches for trimming. Choose a roll length up to 120 inches that covers this height.

Example: For a 108-inch-wide wall: 108 ÷ 24 = 4.5 → order 5 panels. If your wall is 96 inches high, select a roll length that meets or slightly exceeds 96 inches for clean top/bottom trims.

Installation Guidance

1. Prep the surface: Install on smooth, clean, dry, and fully cured painted walls (allow fresh paint to cure at least 30 days). Wipe away dust and let dry.
2. Plan your layout: Mark a straight, plumb line to start your first panel. Dry-fit panels to visualize pattern flow.
3. Apply the first panel: Align the top edge, then smooth from the center outward as you work down the wall to release air.
4. Continue panel by panel: Align the pattern and place each subsequent panel edge-to-edge. Smooth thoroughly for a seamless look.
5. Trim and finish: Use a sharp utility knife and straightedge to trim excess at ceilings, baseboards, and around outlets.

Tips: Install in a dust-free environment between 60–80°F. Not recommended for textured walls, heavy humidity, or surfaces with stain-blocking/low-VOC paints that may reduce adhesion. Always test a small area first.

Care & Maintenance

• Wipe gently with a soft, damp cloth; use mild, diluted soap if needed.
• Avoid abrasive pads, harsh chemicals, and excessive moisture.
• For longevity, keep away from direct heat sources and persistent splashing.

Why It’s a Feel-Good Choice

• PVC-free for a safer home environment.
• Printed with water-based inks that are eco-conscious and low-odor.
• Removable design supports temporary or seasonal style changes.