Whispering Gold Satin Waves

Bring quiet luxury to your space with Whispering Gold Satin Waves, a removable wallpaper that flows across your walls in soft, shimmering curves. Designed for renters and refreshers alike, it installs cleanly and removes with ease. All our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-impact finish.

Key Features

• Removable, renter-friendly wallpaper for effortless home decor updates
• PVC-free material printed with eco-friendly, water-based inks
• Roll size: 24 inches wide; choose heights up to 120 inches
• Smooth, matte surface minimizes glare and highlights the design
• Repositionable during installation for easy alignment
• Suitable for smooth, clean, painted walls, doors, and furniture accents

Sizing and Coverage

• Each roll is 24 in (2 ft) wide and up to 120 in (10 ft) high.
• Maximum coverage per roll: approximately 20 sq ft.
• Measure your wall width and divide by 24 in to estimate the number of rolls; round up for full coverage.
• Example: A 12 ft (144 in) wide wall typically needs 6 rolls (144 ÷ 24 = 6).
• Add a small margin for trimming and pattern alignment.

Installation Guidance

1. Prepare: Ensure walls are smooth, dry, and dust-free. Freshly painted surfaces should cure for at least 30 days.
2. Plan: Mark a level, vertical guideline to keep the first roll perfectly plumb.
3. Apply: Peel a few inches of backing, align the top, and press onto the wall. Continue peeling and smoothing downward.
4. Smooth: Use a felt squeegee or soft cloth to remove air bubbles, working from the center outward.
5. Align: Overlap edges slightly as needed and match the wave pattern carefully.
6. Trim: Use a sharp utility knife to trim along ceilings, baseboards, and around outlets.

Care and Maintenance

• Wipe gently with a soft, damp cloth; use mild soap if needed.
• Avoid harsh cleaners, bleach, and abrasive scrubbers.
• Best for dry, low to moderate humidity areas; ensure good ventilation in bathrooms.
• Not recommended for textured walls, heavy moisture, or areas with direct water contact.

Removal

• Peel slowly from a top corner at a low angle (close to 180°) to release the adhesive.
• If resistance occurs, warm gently with a hair dryer on low heat and continue peeling.
• Adhesive residue is uncommon; if present, remove with mild soapy water.

Note: Colors may vary slightly by lighting and screen settings. For best results, order enough rolls at one time to ensure a consistent print run.