WallCreatives
Whispering Lilac Dunes
Regular price
$4.99
Regular price
Sale price
$4.99
Whispering Lilac Dunes
Whispering Lilac Dunes brings soft, flowing movement to your walls with serene lilac tones that mimic wind-swept sand. This removable wallpaper is a calm, modern accent for bedrooms, living rooms, nurseries, and workspaces—made with a PVC-free material and printed using eco-friendly, water-based inks.
Key Features
- Removable and renter-friendly: Designed for clean removal on most properly prepared, painted walls.
- Roll size: Each roll is 24 inches wide and available in heights up to 120 inches for floor-to-ceiling coverage.
- Seamless look: Hang rolls edge-to-edge for a smooth, continuous pattern.
- Eco-conscious: PVC-free substrate printed with eco-friendly, water-based inks.
- Smooth, matte finish: Low-glare surface highlights the lilac dune pattern.
- Best on smooth walls: Install on clean, dry, non-textured, fully cured painted surfaces.
How to Measure and Order
- Measure height: Choose a roll height equal to (or slightly taller than) your wall height, up to 120 inches, to allow trimming at the top and bottom.
- Calculate quantity: Divide your total wall width by 24 inches to determine how many rolls you need. Round up to the next whole roll.
- Plan for details: Add one extra roll if you have multiple obstacles or plan to cover more than one wall.
Installation Guidance
- Prep the wall: Ensure paint is fully cured (at least 30 days). Clean with mild soap and water, then let dry completely. Remove outlet covers and switch plates.
- Start straight: Use a level to draw a vertical plumb line where your first roll will hang.
- Apply the first roll: Align the edge to your plumb line. Peel back a small section of the backing, stick from the top, and smooth downward, working outward to release air.
- Continue edge-to-edge: Align the pattern and butt seams without overlap. Smooth as you go to prevent bubbles and wrinkles.
- Trim and set: Use a sharp utility knife to trim excess at ceilings, baseboards, and around fixtures. Reinstall covers.
Install in a room-temperature environment on smooth, dry, non-textured walls. Not recommended for high-moisture areas or fresh paint.
Care Instructions
- Dust or wipe gently with a soft, damp cloth.
- Avoid abrasive pads, bleach, or solvent-based cleaners.
- Keep away from direct water spray and prolonged humidity.
- When removing, peel slowly from a corner at a low angle.