Whispering Woods Autumn Glow

Invite the warmth of fall into your home with Whispering Woods Autumn Glow. This removable wallpaper layers golden, amber, and russet tones in a softly lit forest motif—perfect for cozy living rooms, welcoming entryways, or serene bedrooms. Printed on a premium, PVC-free material with eco-friendly, water-based inks, it’s a beautiful choice that’s better for your home and the planet.

Key Features

• Removable and renter-friendly: Peel off cleanly without damaging paint.
• Repositionable during install: Adjust panels as you go for a perfect match.
• Matte finish: Reduces glare and enhances the artwork’s natural depth.
• Roll size: 24 inches wide; choose heights up to 120 inches to fit your wall.
• Seam-matching design: Applies panel by panel for a continuous, custom look.
• PVC-free substrate: Printed with eco-friendly, water-based inks.

Best Surface Conditions

• Clean, smooth, dry, and non-textured painted walls
• Fully cured paint (wait at least 30 days after painting)
• Not recommended for textured walls, high-moisture areas, or surfaces with stain-resistant/low-VOC additives that may reduce adhesion

Care Instructions

• Dust gently with a dry microfiber cloth.
• Spot clean with a damp cloth and mild soap; avoid excessive water.
• Do not use abrasives, bleach, or harsh cleaners.

How to Measure

• Measure wall height and select the panel height that meets or slightly exceeds it (up to 120 inches).
• Determine quantity by dividing wall width (in inches) by 24, then round up to the next whole panel.

Installation Guidance

1. Prep: Smooth and repair the wall, remove dust, and let it dry completely. Mark a vertical plumb line where your first panel will go.
2. Start: Peel back 10–12 inches of the backing from the top of the first panel.
3. Align: Position to the plumb line and lightly tack the top in place.
4. Smooth: Using a squeegee or soft cloth, smooth downward and outward while removing the backing a little at a time to avoid bubbles.
5. Continue: Apply the next panel edge-to-edge (do not overlap), aligning the pattern.
6. Trim: Use a sharp utility knife to trim excess along ceilings, baseboards, and around outlets.
7. Adjust: If needed, gently peel back and reposition. Avoid stretching the material.
8. Removal: Lift a corner and peel slowly at a low angle for a clean release.

Sustainably made on PVC-free material and printed with eco-friendly, water-based inks for a safer home and a lighter footprint.