Skip to product information

The Auburn Wolf of Wintertide

The Auburn Wolf of Wintertide

Add to wishlist
Description:

The Auburn Wolf of Wintertide

Invite a whisper of winter magic into your space. The Auburn Wolf of Wintertide blends warm, auburn undertones with cool seasonal calm, creating a striking focal point that remains soft, modern, and easy to live with. Designed for effortless updates and renter-friendly refreshes, this removable wallpaper transforms walls without the long-term commitment.

Why you’ll love it

  • Removable and renter-friendly: Update your space and remove cleanly from most painted walls.
  • Eco-conscious: PVC-free material printed with eco-friendly, water-based inks.
  • Right-sized panels: Rolls are 24 inches wide and up to 120 inches high for simpler planning and installation.
  • Refined finish: Designed to look and feel like a premium wall covering.
  • Repositionable during install: Align panels with confidence for a seamless look.

Sizing and coverage

Each roll is 24 in W and available in heights up to 120 in. Measure your wall height and choose the roll height that matches or slightly exceeds it. To estimate how many rolls you need, measure the total wall width in inches and divide by 24, then round up.

Surface compatibility

  • Best on smooth, clean, dry, and fully cured painted walls (wait at least 30 days after painting).
  • Not recommended for heavy texture, brick, stone, unsealed wood, or areas with persistent moisture.
  • Test a small area if you have specialty paints (e.g., stain-resistant, low-adhesion formulas).

Installation guidance

  1. Prep the wall: Wipe down with a damp, lint-free cloth and let dry. Remove outlet covers and hardware.
  2. Plan your layout: Mark a straight, plumb line 24 inches from your starting edge to keep panels perfectly vertical.
  3. Start at the top: Peel back 6–12 inches of the liner, align the top of the first panel, and lightly tack it in place.
  4. Smooth as you go: Working downward, slowly remove the liner while smoothing with a squeegee or soft cloth to push out air bubbles.
  5. Add the next panel: Align the pattern and butt edges gentlyβ€”do not stretch. Repeat across the wall.
  6. Trim cleanly: Use a sharp blade along ceilings, baseboards, and around outlets for a crisp finish.
  7. Removal: Lift a corner and peel back slowly at a 180Β° angle.

Care and maintenance

  • Wipe with a soft, damp cloth; use mild soap only if needed.
  • Avoid abrasive cleaners, bleach, and scrub brushes.
  • Keep away from direct heat sources and excessive steam.

Good to know

  • Material is PVC-free and printed with eco-friendly, water-based inks.
  • Color can vary slightly between batches; for best results, order all rolls for a project at the same time.
  • Order a little extra to allow for trimming and pattern alignment around doors, windows, and corners.
View full details