Whispering Sand Waves Mural
Whispering Sand Waves Mural
Couldn't load pickup availability
Add to wishlist
Description:
Whispering Sand Waves Mural
Bring the soft movement of wind-swept dunes into your space. The Whispering Sand Waves Mural adds a calm, organic rhythm to walls with layered, neutral tones that suit coastal, modern, and minimalist interiors. This removable wallpaper is PVC-free and printed with eco-friendly, water-based inks for a beautiful, responsible upgrade to any room.
Key features
- Serene sand-wave design that creates depth and calm in living rooms, bedrooms, and entryways
- Removable wall mural panels that are easy to install and update when you’re ready for a new look
- PVC-free material printed with eco-friendly, water-based inks
- Clean, minimal seams with 24-inch wide panels for precise alignment
- Available in panel heights up to 120 inches to fit most standard ceilings
- Ideal for smooth, clean, properly primed and painted walls
Sizing and coverage
Each roll (panel) is 24 inches wide and available in heights up to 120 inches. Measure your wall’s width and divide by 24 to determine how many panels you need, then round up.
- Example: A 10 ft (120 in) wide wall typically needs 5 panels (120 ÷ 24 = 5).
- Add 2–4 inches to both width and height when planning to allow for trimming and perfect alignment.
Installation guidance
- Prepare the wall: Ensure the surface is smooth, dry, dust-free, and fully cured if recently painted. Avoid highly textured or damp areas.
- Plan your layout: Mark a straight, plumb line to start your first panel. Lay out panels in order before hanging.
- Apply the first panel: Align the top along your plumb line. If self-adhesive, peel back 6–12 inches of the liner and smooth as you go. If using paste-the-wall, apply adhesive per manufacturer directions and hang the panel.
- Smooth and align: Use a wallpaper smoothing tool or soft cloth to press out air bubbles from the center outward. Butt seams edge-to-edge—do not overlap.
- Continue panel by panel: Match the design at the seams. Trim excess at the ceiling, baseboard, and corners with a sharp blade.
- Allow to set: Lightly smooth all seams once more for a crisp finish.
Care and removal
- Wipe gently with a soft, damp cloth. Avoid abrasives and harsh chemicals.
- For kitchens and hallways, occasional spot-cleaning is recommended; do not saturate.
- When removing, lift a corner and peel back slowly at a low angle. If needed, warm the panel lightly with a hair dryer to ease release.
Good to know
- Best results on smooth, properly primed walls free of dust and grease.
- Not recommended on heavy texture, fresh paint that hasn’t cured, or stain-resistant/low-adhesion coatings.
- Colors may appear slightly different in person due to screen settings and lighting.
Share


