Float a whisper of quiet glamour across your walls. Argent & Gold Celestial Feathers features an airy feather motif in refined silver-and-gold tones, bringing soft movement and a celestial glow to bedrooms, living rooms, nurseries, and inspired workspaces. This removable wallpaper installs cleanly, transforms instantly, and lifts off when you’re ready for a new look.
All of our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-impact finish you can feel good about.
Key Features
Removable and renter-friendly: Peel-and-stick application with clean removal on most properly painted walls.
PVC-free: Made without PVC and printed with water-based inks.
Easy to install: No paste, no mess—just measure, peel, and smooth.
Versatile design: Elegant feather pattern in argent and gold-inspired hues suits modern, classic, and bohemian spaces.
Panel sizing: Each roll is 24 in wide and available in heights up to 120 in to fit standard walls.
Renter and refresh friendly: Ideal for accent walls, entryways, and feature niches.
Sizing & Coverage
Roll width: 24 in (61 cm)
Roll height: Choose your height up to 120 in (305 cm)
How many rolls do you need? Measure your wall width in inches, divide by 24, and round up to the next whole number. For example, a 120 in wall typically needs 5 rolls.
Trim allowance: Add 2–3 in to your selected height to account for ceiling and floor variations.
Installation Guidance
Prepare the wall: Surface must be smooth, clean, and dry. Allow fresh paint to cure for at least 30 days.
Plan your layout: Use a level or laser to mark a plumb line. Start in the center of the wall or at the most visible edge.
Peel and position: Peel back 8–12 in of the liner, align the top, and lightly tack in place.
Smooth as you go: Working downward, smooth from the center outward while gradually removing the backing.
Edge-to-edge seams: Butt adjoining panels carefully for a seamless look—do not overlap.
Trim: Use a sharp blade to trim along ceilings, baseboards, and around outlets.
Surface & Paint Compatibility
Best on smooth, non-textured surfaces painted with well-cured eggshell, satin, or semi-gloss finishes.
Not recommended for heavy texture, brick, stucco, or areas with direct water contact.
Some stain-resistant, low/zero-VOC, or Teflon-infused paints can reduce adhesion—always test first.
Test a small piece on your wall for 24 hours to confirm adhesion and clean removability.
Care & Removal
Wipe gently with a soft, damp cloth. Mild soap as needed. Avoid abrasives, bleach, and harsh chemicals.
For bathrooms, ensure good ventilation and avoid direct water spray.
To remove, peel slowly at a low angle, pulling back on itself. If needed, warm with a hair dryer on low.
Designed for easy, beautiful transformations—crafted PVC-free and printed with eco-friendly, water-based inks.
