Make a dramatic statement with Obsidian Gold Fracture, a removable wallpaper that channels the elegance of black stone veined with gold-toned lines. Bold yet refined, it adds modern glam to bedrooms, dining rooms, entryways, and creative workspaces—without the commitment of traditional wallpaper.
PVC-free and printed with eco-friendly, water-based inks, this design is a conscious choice for style-forward, renter-friendly decor.
Key Features
Removable, renter-friendly wallpaper that peels off cleanly when it’s time for a change
PVC-free substrate printed with water-based inks for a low-odor, eco-minded finish
Roll width: 24 inches; heights available up to 120 inches to match your wall
Repositionable during installation for easy alignment and a polished look
Ideal for smooth, clean, dry walls; great for accent walls, niches, and furniture fronts
Sizing & Coverage
Each roll is 24 inches wide and cut to the height you choose (up to 120 inches). Measure your wall width and divide by 24 inches to estimate how many panels you’ll need. For best results, allow 1–2 inches of extra height for trimming at the ceiling and baseboard.
Works best on smooth, properly painted drywall. Not recommended for textured surfaces (orange peel, knockdown), raw plaster, brick, or areas with constant moisture.
Installation Guide
Unpack and allow panels to acclimate flat for a few hours in the installation room.
Prepare the wall: ensure it is smooth, clean, dry, and fully cured (fresh paint should cure at least 30 days).
Mark a plumb line for your first panel to ensure perfectly straight placement.
Starting at the top, peel back a small section of the liner, align to the plumb line, and smooth downward.
Continue peeling the liner a little at a time, smoothing with a plastic smoother or soft cloth to remove air bubbles.
Install subsequent panels edge-to-edge (butt seams), carefully aligning the pattern.
Trim excess at ceiling, baseboards, and around outlets with a sharp blade.
To remove, slowly peel from a corner at a low angle to release without damage.
Care Instructions
Wipe clean with a soft, damp cloth; use mild soap if needed
Avoid harsh chemicals, bleach, and abrasive scrubbers
Do not saturate; ensure surfaces stay dry after cleaning
Good to Know
Order a sample to test color and adhesion on your specific surface and paint finish
Best applied to smooth, eggshell or satin paints that are fully cured
Avoid installing on high-texture walls, freshly painted walls, or in areas with heavy steam
