Transform your space with the Shadowed Slate Wave Wall β a removable wallpaper featuring soft, sculptural waves in layered slate tones. This modern, calming pattern adds depth and movement to bedrooms, living rooms, entryways, and workspaces without permanent commitment. All of our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a cleaner choice inside your home.
Key Features
Removable and renter-friendly: Peel off cleanly when itβs time for a refresh.
Eco-conscious: PVC-free material printed with water-based inks.
Modern slate palette: Subtle waves create a sophisticated, dimensional look.
Easy to plan: Panels are 24 in wide with selectable heights up to 120 in.
DIY-friendly: Smooth-apply adhesive for straightforward alignment and repositioning during install.
Matte finish: Reduces glare for a refined, seamless appearance.
Sizing & Coverage
Each roll is a panel measuring 24 inches wide by your chosen height (up to 120 inches). To determine how many panels you need, measure your wall width in inches and divide by 24, then round up. For height, select the option that meets or slightly exceeds your wall height to allow for trimming at the top and bottom.
Installation Guidance
Prep the wall: Ensure the surface is smooth, clean, dry, and fully cured (wait at least 2 weeks after painting). Remove dust and grease.
Plan your layout: Mark a level, plumb line for the first panel. Work left to right (or right to left) keeping seams straight.
Peel & place: Peel 6β12 inches of backing, align the top, and smooth downward with a squeegee or soft cloth. Continue peeling the backing a little at a time.
Smooth & trim: Smooth out bubbles from the center to edges. Trim excess at ceiling, baseboard, and around outlets with a sharp utility knife.
Repeat: Align the pattern and butt seams carefully for a continuous look.
Tips: Two-person installation is recommended. Avoid heavy texture, high-moisture areas, or stain-resistant/low-stick paints that may impede adhesion. When unsure, apply a small test piece first.
Care & Maintenance
Wipe with a soft, damp cloth; use mild soap only if needed.
Avoid abrasives, bleach, or solvent cleaners.
Do not saturate; keep away from direct water spray and prolonged humidity.
Good to Know
Color appearance may vary by screen; order all panels needed at the same time for the most consistent result.
Ideal for smooth interior walls. Always measure carefully and allow 1β2 inches for trimming.
Designed for temporary updates with a premium, permanent-look finish.
