Raw Concrete Formwork Panels
Raw Concrete Formwork Panels
Wallpaper Calculator
Dimensions in inches.
You will need:
0 rolls
Couldn't load pickup availability
Raw Concrete Formwork Panels
Bring the industrial warmth of board-formed concrete to your space—without the weight or mess. This removable, peel-and-stick wallpaper recreates the texture and grain of raw concrete formwork for a modern, loft-inspired look that’s perfect for feature walls, entryways, and creative studios.
All wallpapers are PVC-free and printed with eco-friendly, water-based inks for a low-odor, home-safe finish.
Key Features
- Removable and repositionable peel-and-stick wallpaper
- PVC-free substrate printed with eco-friendly, water-based inks
- Matte, glare-free finish with realistic formwork panel lines
- Rolls are 24 inches wide; choose heights up to 120 inches for floor-to-ceiling coverage
- Edge-to-edge pattern alignment for a seamless wall
- Rental-friendly and damage-free removal from most painted walls
Size and Coverage
Each roll measures 24 inches wide by your selected height (up to 120 inches). To estimate how many panels you need, measure your wall width in inches and divide by 24; add one extra panel for pattern alignment and trimming. Allow 0.5–1 inch trim at the top and bottom.
Surface Compatibility
- Best on smooth, clean, non-textured, latex-painted walls
- Wait at least 30 days after painting before installation
- Not recommended on textured surfaces, brick, unsealed wood, or high-moisture areas with direct splashes/steam
- Test a small area if walls have stain-resistant or scrubbable paints
Installation Guidance
- Unroll panels and let them relax flat for 24 hours.
- Clean the wall with mild soap and water; let it dry completely.
- Mark a plumb line 24 inches from your starting edge.
- Peel back 6–8 inches of the liner and align the top of the first panel to the plumb line.
- Apply from top to bottom, smoothing outward with a felt squeegee to remove air.
- Butt edges (do not overlap) and match the formwork seams across panels.
- Trim excess at ceilings, baseboards, and around outlets with a sharp blade.
Tip: Install at room temperature (65–75°F) in a dust-free space. If misaligned, gently peel back and reposition.
Care Instructions
- Wipe clean with a soft, damp cloth
- Avoid abrasives, bleach, and solvent cleaners
- Indoor use only; avoid prolonged high humidity or direct water
Removal
Lift a top corner and peel slowly at a low angle. The adhesive is designed to release cleanly from most properly cured, painted walls.
Good to Know
- Low-odor, PVC-free materials with water-based inks
- Colors may vary slightly by monitor; ordering a sample is recommended
Shipping & Returns
Material
Disclaimer
Share



EASY TO INSTALL
Enjoy a surprisingly simple installation of Raw Concrete Formwork Panels
PEEL AND STICK
Raw Concrete Formwork Panels is made of peel and stick material. Each panel is 24 in wide
CUSTOM WALL SIZE
Raw Concrete Formwork Panels is fully customizable to your wall's dimensions. Specify the exact size and cropping for a perfect fit.
ECO-FRIENDLY
Sustainably produced with eco-friendly inks and PVC-free material for a healthier home.

Blog
More Than Just a Pretty Pattern: Why Wallpaper is the Design Upgrade Your Home is Craving