Weathered Industrial Steel Siding
Weathered Industrial Steel Siding
Wallpaper Calculator
Dimensions in inches.
You will need:
0 rolls
Couldn't load pickup availability
Weathered Industrial Steel Siding
Bring the character of aged metal into your space—without the cold touch. Weathered Industrial Steel Siding is a removable wallpaper that captures the raw, timeworn look of industrial steel for modern lofts, contemporary spaces, and rustic interiors. Each roll is 24 inches wide and available in heights up to 120 inches for a tailored, floor-to-ceiling finish.
PVC-free and printed with eco-friendly, water-based inks, this design delivers striking realism with a matte, low-glare finish that’s renter-friendly and easy to live with.
Key Features
- Removable wallpaper designed for smooth, primed, painted walls
- Rolls are 24 in wide; choose heights up to 120 in to match your wall
- PVC-free material printed with water-based, eco-conscious inks
- Matte finish minimizes glare and enhances the weathered steel effect
- Panels align for a continuous, seamless look across your wall
- Low-odor print process suitable for homes and rentals
Installation Guidance
- Condition the wallpaper flat in-room for 24 hours.
- Prep the wall: clean with mild soap and water, rinse, and let dry completely. Allow new paint to cure for at least 30 days.
- Find your starting edge and mark a vertical plumb line to keep panels straight.
- Align the first panel to the plumb line. Peel back a small section of the liner at the top, apply, and smooth from the center outward while gradually removing the liner.
- Butt the next panel edge-to-edge (do not overlap), matching the design as you go. Smooth seams firmly.
- Trim excess at ceilings, baseboards, and around outlets with a sharp blade and straightedge.
- To remove, slowly peel from a top corner at a low angle, pulling back on itself.
Care Instructions
- Wipe with a soft, damp cloth as needed; use mild, non-abrasive soap for tougher spots.
- Avoid bleach, solvents, and abrasive scrubbers.
- Ensure surfaces stay dry; use in well-ventilated areas if near humidity or steam.
Tip: Measure your wall width and divide by 24 inches to estimate the number of panels you need. Choose the roll height closest to (or slightly taller than) your wall height for the cleanest trim.
Shipping & Returns
Material
Disclaimer
Share



EASY TO INSTALL
Enjoy a surprisingly simple installation of Weathered Industrial Steel Siding
PEEL AND STICK
Weathered Industrial Steel Siding is made of peel and stick material. Each panel is 24 in wide
CUSTOM WALL SIZE
Weathered Industrial Steel Siding is fully customizable to your wall's dimensions. Specify the exact size and cropping for a perfect fit.
ECO-FRIENDLY
Sustainably produced with eco-friendly inks and PVC-free material for a healthier home.

Blog
More Than Just a Pretty Pattern: Why Wallpaper is the Design Upgrade Your Home is Craving