Sculpted Desert Waves
Sculpted Desert Waves
Wallpaper Calculator
Dimensions in inches.
You will need:
0 rolls
Couldn't load pickup availability
Sculpted Desert Waves
Bring the calm rhythm of wind-carved dunes into your space. Sculpted Desert Waves layers soft, flowing contours that add depth, movement, and warmthβperfect for an eye-catching accent wall or a serene, whole-room refresh.
Each removable wallpaper panel is 24 inches wide and custom-cut to your selected height (up to 120 inches). Our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-impact finish you can feel good about.
Key features
- Removable wallpaper designed for renter-friendly updates and easy refreshes.
- Panels measure 24 in wide; choose your height up to 120 in for a floor-to-ceiling fit.
- PVC-free material printed with eco-friendly, water-based inks.
- Rich detail and crisp lines that complement modern, organic, and minimalist interiors.
- Ideal for smooth, clean, and properly primed or painted walls.
Installation guidance
- Prepare the wall: Ensure it is smooth, clean, dry, and fully cured (fresh paint should cure for at least 30 days). Remove dust and repair any texture or holes.
- Measure and plan: Measure wall height and select the appropriate panel height. Determine how many 24 in panels you need by dividing your wall width (in inches) by 24, then round up. Add 1β2 in to height for trimming. Example: a 120 in wide wall needs 5 panels.
- Mark a plumb line: Use a level to draw a vertical guide for your first panel. A straight first drop makes every panel after it easy.
- Apply the first panel: Align with the plumb line and install per your adhesive methodβs instructions. Smooth from the center outward with a squeegee or soft cloth to remove air bubbles.
- Continue panel by panel: Butt seams edge-to-edge, aligning the design for a seamless look.
- Trim and finish: Use a sharp knife and straightedge to trim excess at the ceiling, baseboard, and around outlets. If required by your adhesive type, allow proper cure time before light cleaning.
Care instructions
- Wipe gently with a soft, damp cloth; avoid excessive moisture.
- Do not use harsh chemicals, bleach, or abrasive pads.
- Test any cleaning method on a small, inconspicuous area first.
- For removal, start at a corner and peel back slowly at a low angle. If you feel resistance, warm the area gently or follow your adhesive manufacturerβs guidance.
Good to know
- Best results on smooth, non-textured, properly primed or painted walls.
- Avoid high-humidity locations where persistent steam or moisture may affect adhesion.
- Color may vary slightly from screen to wall due to display settings and lighting.
Shipping & Returns
Material
Disclaimer
Share



EASY TO INSTALL
Enjoy a surprisingly simple installation of Sculpted Desert Waves
PEEL AND STICK
Sculpted Desert Waves is made of peel and stick material. Each panel is 24 in wide
CUSTOM WALL SIZE
Sculpted Desert Waves is fully customizable to your wall's dimensions. Specify the exact size and cropping for a perfect fit.
ECO-FRIENDLY
Sustainably produced with eco-friendly inks and PVC-free material for a healthier home.

Blog
More Than Just a Pretty Pattern: Why Wallpaper is the Design Upgrade Your Home is Craving