Skip to product information

Molten Gold Rift Wallpaper

Molten Gold Rift Wallpaper

Add to wishlist
Description:

Molten Gold Rift Wallpaper

Transform your space with the molten, marbled movement of Molten Gold Rift. This removable wallpaper brings fluid, gold-inspired striations to your walls—adding warmth, depth, and modern drama to living rooms, bedrooms, entries, and home offices.

Key Features

  • Removable and renter-friendly: Designed for clean removal from most smooth, painted walls.
  • PVC-free material: Safer for your home and the planet.
  • Eco-conscious printing: Produced with low-odor, water-based inks.
  • Easy to plan: Each roll is a single panel 24 inches wide; select heights up to 120 inches.
  • Seam-aligning panels: Install edge-to-edge for a continuous, cohesive look.
  • Versatile style: Gold-toned veining pairs beautifully with neutrals, black accents, and natural textures.

Sizing & Coverage

Each roll covers 24 inches in width. To determine how many rolls you need, measure your wall width, divide by 24 inches, and round up to the next whole number. Select a roll height that meets or slightly exceeds your wall height (up to 120 inches) to allow room for trimming at the ceiling and baseboard.

Tip: Walls and ceilings are rarely perfectly level. Add 1–2 inches to your height selection where possible for the cleanest trim.

Installation Guidance

  1. Prep the wall: Ensure the surface is smooth, clean, dry, and fully cured if recently painted. Remove dust, grease, and flaky paint.
  2. Plan your layout: Mark a plumb line where your first panel will go for a perfectly straight start.
  3. Apply the first panel: Starting at the top, place the panel along the plumb line and smooth downward, pressing out air as you go.
  4. Align the seams: Install subsequent panels edge-to-edge, gently adjusting to match the pattern.
  5. Smooth and trim: Use a felt squeegee or soft cloth to smooth the surface, then trim excess at the ceiling, baseboard, and around outlets with a sharp blade.
  6. Settle time: Allow panels to settle for 24 hours before heavy cleaning or moving wall-mounted items back into place.

Care & Maintenance

  • Dust regularly and wipe with a damp microfiber cloth.
  • For spots, use mild soap and water; avoid bleach, solvents, or abrasives.
  • Avoid prolonged exposure to high humidity or direct water contact.
  • Test any cleaning method on a small, inconspicuous area first.

Good to Know

  • PVC-free substrate printed with eco-friendly, water-based inks.
  • Best on smooth, properly primed and painted walls; not recommended on heavy texture or peeling surfaces.
  • Color may vary slightly by monitor and lighting; consider ordering enough panels in one batch for the best match.
View full details