Bring the hush of snowy evergreens into your space with Guardian of the Winter Woods. This removable wallpaper layers cool tones and forest silhouettes to create a calm, modern alpine moodβperfect for bedrooms, nurseries, entryways, and cozy reading nooks.
Key Features
Removable wallpaper for an easy, renter-friendly refresh
PVC-free material, printed with eco-friendly, water-based inks
Rolls are 24 in wide; select panel heights up to 120 in
Edge-to-edge panel alignment for a seamless finish
Works best on smooth, clean, painted interior walls
Sizing and Coverage
Each panel measures 24 inches wide. To determine how many panels you need, measure your total wall width in inches, divide by 24, and round up.
Example: A 144 in (12 ft) wide wall needs 6 panels.
Choose a panel height equal to or slightly greater than your wall height (up to 120 in), then trim during installation.
Installation Guidance
Let freshly painted walls cure fully (typically 2β4 weeks).
Prepare the surface: smooth, dry, dust-free, and non-textured.
Mark a plumb vertical guideline to keep the first panel straight.
Starting at the top, peel 6β8 inches of backing and apply, smoothing downward with a felt squeegee.
Continue peeling and smoothing in small sections to avoid bubbles.
Install subsequent panels edge-to-edge, aligning the design.
Trim excess at ceilings, baseboards, and around outlets with a sharp utility knife.
If bubbles appear, gently lift and reapply; avoid stretching the material.
Care Instructions
Wipe gently with a soft, damp cloth.
Avoid abrasive pads, bleach, and solvent-based cleaners.
Test cleaning in an inconspicuous spot first.
Good to Know
Best results on eggshell, satin, or semi-gloss paint finishes.
Not recommended on textured walls, uncured paint, or high-moisture/steam-prone surfaces.
Colors may vary by screen; print runs can have minor, normal variation.
Material is PVC-free and printed with eco-friendly, water-based inks for a low-odor, home-safe finish.
