Bring the warmth of hand-worked wood to your walls. The Sculpted Timber Weave Mural captures the depth and rhythm of interlaced timber, creating a calm, organic texture that enriches living rooms, bedrooms, entryways, and creative spaces.
This removable wallpaper is PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-impact finish. Each roll is 24 inches wide and available in heights up to 120 inches to fit your wall.
Key Features
Removable wallpaper mural designed for easy home refreshes
PVC-free material printed with eco-friendly, water-based inks
Roll size: 24 in W; select your height up to 120 in
Edge-to-edge panel alignment for a seamless look
Ideal for smooth, primed interior walls
Sizing & Coverage
Each roll covers 24 inches of wall width by your chosen height (up to 120 inches).
Measure your total wall width in inches and divide by 24 to estimate the number of rolls. Round up to the next whole number.
Allow extra for trimming and pattern alignment, especially on out-of-plumb walls.
Surface Preparation
Install on smooth, clean, dry, and fully cured painted walls (avoid fresh paint until fully cured).
Wipe away dust and grease; repair and sand bumps or texture for best results.
Avoid heavy texture, high humidity, or areas with direct water contact.
Use a level to mark a straight plumb line for your first panel.
Installation Guidance
Unroll panels and let them relax flat for 10β20 minutes.
Mark a plumb line where the first panel will go.
Apply the first panel from top to bottom, aligning to the plumb line.
Smooth from the center outward with a wallpaper tool, removing bubbles as you go.
Install subsequent panels edge-to-edge, carefully aligning the timber weave pattern.
Trim excess at ceilings, baseboards, and around outlets with a sharp blade.
Work slowly with two people for the cleanest seams and alignment.
Care Instructions
Wipe with a soft, damp cloth; use mild soap if needed.
Avoid abrasive scrubbers, harsh chemicals, or solvents.
Not recommended for high-moisture or steam-heavy areas.
Test any cleaner on a small, inconspicuous area first.
Removal
To remove, start at a corner and peel back slowly at a low angle. If a panel resists, warm it gently or work slowly to reduce wall stress. If you installed with paste, lightly mist with warm water to help release before peeling.
Helpful Notes
Order all panels for a project at the same time for the best color consistency.
Colors may vary slightly from screen to screen; a sample is recommended.
For newly painted walls, wait until paint is fully cured before installation.
