Monolithic Urban Facade
Monolithic Urban Facade
Wallpaper Calculator
Dimensions in inches.
You will need:
0 rolls
Couldn't load pickup availability
Monolithic Urban Facade
Channel the quiet strength of city architecture with a modern, concrete-inspired motif. Monolithic Urban Facade brings the refined texture of an urban facade to your spaceβclean, minimal, and timeless. This removable wallpaper is renter-friendly, easy to install, and crafted with planet-conscious materials.
Key Features
- Removable, self-adhesive wallpaper designed for clean removal on most painted walls
- Matte, non-reflective finish that mimics poured concrete for a sleek, architectural look
- Panels measure 24 inches wide and up to 120 inches high to fit ceilings up to 10 feet
- Seamless edge-to-edge design for a continuous, monolithic effect
- PVC-free substrate and printed with eco-friendly, water-based inks
- Low-odor and suitable for homes, rentals, offices, and feature walls
Size and Coverage
Each roll is a vertical panel 24 inches (61 cm) wide. Choose a height that matches your wall, up to 120 inches (305 cm). To cover a wall, order one panel for every 24 inches of width. For example, a 10-foot-wide wall typically needs five 24-inch panels.
Surface Suitability
- Best on smooth, clean, fully cured, painted walls (eggshell, satin, or semi-gloss)
- Not recommended for heavy texture (orange peel/knockdown), brick, or unsealed surfaces
- Allow new paint to cure for at least 30 days before installation
- Test a small area if walls are freshly painted, highly porous, or have specialty finishes
Installation Guidance
- Prepare the wall: wipe down to remove dust and let dry completely.
- Plan your layout: start from a plumb line for the first panel to ensure straight seams.
- Peel and position: remove a few inches of backing, align the top, and apply gradually.
- Smooth as you go: use a felt squeegee or soft cloth to push out air from the center to edges.
- Trim excess: use a sharp utility knife along ceilings, baseboards, and outlets.
- Repeat: butt seams edge-to-edge without overlapping for a seamless look.
Tip: If a panel misaligns, gently peel back and reposition. Work in a dust-free environment for best adhesion.
Care and Maintenance
- Wipe with a soft, damp cloth; use mild soap if needed
- Avoid harsh chemicals, abrasives, and excessive moisture
- For long-term results, keep away from direct heat sources and heavy steam
Sustainability
All our wallpapers are PVC-free and printed with eco-friendly, water-based inks. Made to order to reduce waste and produced with a low-odor process for healthier indoor air.
Shipping & Returns
Material
Disclaimer
Share



EASY TO INSTALL
Enjoy a surprisingly simple installation of Monolithic Urban Facade
PEEL AND STICK
Monolithic Urban Facade is made of peel and stick material. Each panel is 24 in wide
CUSTOM WALL SIZE
Monolithic Urban Facade is fully customizable to your wall's dimensions. Specify the exact size and cropping for a perfect fit.
ECO-FRIENDLY
Sustainably produced with eco-friendly inks and PVC-free material for a healthier home.

Blog
More Than Just a Pretty Pattern: Why Wallpaper is the Design Upgrade Your Home is Craving