Elevate any room with the warm sophistication of Bronze Quartz Facets. This removable, renter-friendly wallpaper features a faceted, quartz-inspired geometry in bronze tones that adds depth and modern elegance to your space. Printed on PVC-free material with eco-friendly, water-based inks, it delivers a beautiful, responsible upgrade for walls in living rooms, bedrooms, entryways, and home offices.
Key Features
Removable, renter-friendly wallcovering for smooth, painted surfaces
Panels measure 24 in wide; select heights up to 120 in
PVC-free substrate printed with eco-friendly, water-based inks
Edge-to-edge installation for a seamless, modern look
Ideal for accent walls or full-room transformations
Sizing & Coverage
Each panel covers 24 inches in width by your chosen height (up to 120 inches). To estimate how many panels you need, measure your wall width in inches, divide by 24, and round up.
Example: A 10 ft (120 in) wide wall typically needs 5 panels.
Tip: Add 1β2 inches to your selected height for clean trimming at the ceiling and baseboard.
Installation Guidance
Prep the wall: Ensure it is smooth, clean, dry, and fully cured (fresh paint should cure for at least 30 days). Lightly sand high spots and remove dust.
Plan your layout: Start from the straightest wall. Use a level to mark a plumb line for your first panel.
Cut and position: Pre-cut panels, leaving 1β2 inches extra at the top and bottom for trimming.
Hang the first panel: Align to the plumb line and smooth from the center outward with a felt squeegee to remove air bubbles.
Continue with remaining panels: Hang edge-to-edge (butt seams), carefully aligning the design.
Trim and finish: Use a sharp blade to trim at ceilings, baseboards, and around outlets. Avoid stretching the material while smoothing.
Set and acclimate: Allow 24 hours for the adhesive bond to stabilize; keep the room between 60β80Β°F (16β27Β°C).
Note: If your wallpaper is peel-and-stick, remove the backing gradually as you smooth. If using paste-the-wall application, follow the adhesive manufacturerβs instructions.
Care Instructions
Wipe clean with a soft, damp cloth; use mild soap if needed.
Avoid abrasive pads, bleach, or strong solvents.
Not recommended for areas with prolonged moisture or direct steam.
Test cleaning in an inconspicuous area first.
Good to Know
Best results on smooth, properly primed and painted walls; heavy texture may show through.
PVC-free materials and water-based inks support a lower-impact, eco-conscious home.
Colors may vary by screen; view in natural light to evaluate tone.
