Bronze Quartz Facets Wallpaper

Elevate any room with the warm sophistication of Bronze Quartz Facets. This removable, renter-friendly wallpaper features a faceted, quartz-inspired geometry in bronze tones that adds depth and modern elegance to your space. Printed on PVC-free material with eco-friendly, water-based inks, it delivers a beautiful, responsible upgrade for walls in living rooms, bedrooms, entryways, and home offices.

Key Features

• Removable, renter-friendly wallcovering for smooth, painted surfaces
• Panels measure 24 in wide; select heights up to 120 in
• PVC-free substrate printed with eco-friendly, water-based inks
• Edge-to-edge installation for a seamless, modern look
• Ideal for accent walls or full-room transformations

Sizing & Coverage

Each panel covers 24 inches in width by your chosen height (up to 120 inches). To estimate how many panels you need, measure your wall width in inches, divide by 24, and round up.

• Example: A 10 ft (120 in) wide wall typically needs 5 panels.
• Tip: Add 1–2 inches to your selected height for clean trimming at the ceiling and baseboard.

Installation Guidance

1. Prep the wall: Ensure it is smooth, clean, dry, and fully cured (fresh paint should cure for at least 30 days). Lightly sand high spots and remove dust.
2. Plan your layout: Start from the straightest wall. Use a level to mark a plumb line for your first panel.
3. Cut and position: Pre-cut panels, leaving 1–2 inches extra at the top and bottom for trimming.
4. Hang the first panel: Align to the plumb line and smooth from the center outward with a felt squeegee to remove air bubbles.
5. Continue with remaining panels: Hang edge-to-edge (butt seams), carefully aligning the design.
6. Trim and finish: Use a sharp blade to trim at ceilings, baseboards, and around outlets. Avoid stretching the material while smoothing.
7. Set and acclimate: Allow 24 hours for the adhesive bond to stabilize; keep the room between 60–80°F (16–27°C).

Note: If your wallpaper is peel-and-stick, remove the backing gradually as you smooth. If using paste-the-wall application, follow the adhesive manufacturer’s instructions.

Care Instructions

• Wipe clean with a soft, damp cloth; use mild soap if needed.
• Avoid abrasive pads, bleach, or strong solvents.
• Not recommended for areas with prolonged moisture or direct steam.
• Test cleaning in an inconspicuous area first.

Good to Know

• Best results on smooth, properly primed and painted walls; heavy texture may show through.
• PVC-free materials and water-based inks support a lower-impact, eco-conscious home.
• Colors may vary by screen; view in natural light to evaluate tone.