Whispers of a Gilded Peacock

Transform your space with a graceful cascade of peacock-inspired feathers and gilded accents. Whispers of a Gilded Peacock brings elegant movement and jewel-toned depth to any room—perfect for statement walls, cozy bedrooms, creative studios, and renter-friendly refreshes. This removable wallpaper is PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-impact finish.

Key Features

• Removable and renter-friendly: Install, reposition during application, and remove cleanly from most properly painted walls.
• PVC-free material: Designed without PVC for a safer choice in homes and studios.
• Eco-conscious printing: Vibrant, low-odor, water-based inks.
• Made to fit: Rolls are 24 inches wide; select your height up to 120 inches.
• Refined design: Peacock feather motifs with a gilded look that complements modern, vintage, and Art Deco styles.

Sizing and Coverage

Each roll is 24 inches (61 cm) wide and available in heights up to 120 inches (305 cm).

• Measure your wall width and divide by 24 inches to estimate the number of panels. Round up to the next whole panel.
• Choose a panel height equal to or slightly taller than your wall; allow 1–2 inches for trimming at the top and bottom.
• Panels install edge-to-edge for a continuous pattern.

Surface Compatibility

• Best on smooth, clean, and fully cured painted walls (eggshell, satin, or semi-gloss finishes).
• Not recommended on textured walls, brick, stone, unsealed wood, or surfaces with moisture, grease, or dust.
• Some stain-resistant, low-VOC, or silicone-rich paints may reduce adhesion; always test a small area first.

Installation Guidance

1. Prep the wall: Wipe down to remove dust/grease. Ensure paint is fully cured (typically 30 days for fresh paint).
2. Plan your layout: Use a level to mark a straight vertical guide line where your first panel will go.
3. Peel and place: Peel 6–12 inches of backing and stick the top of the panel, aligning to the guide.
4. Smooth as you go: Working downward, peel more backing and smooth with a felt squeegee or soft cloth from center outward.
5. Match and join: Install subsequent panels edge-to-edge, aligning the pattern without overlap.
6. Trim and finish: Use a sharp blade and straightedge to trim excess at ceiling, baseboard, and around outlets.

Care and Removal

• Wipe clean with a soft, damp cloth; use mild soap if needed.
• Avoid abrasive cleaners, excessive moisture, and harsh chemicals.
• To remove, slowly peel back at a low angle. Any remaining tack can be lifted by reapplying and peeling again.

Sustainability

PVC-free substrate and eco-friendly, water-based inks reduce environmental impact while delivering crisp detail and rich color.