Bring the lush calm of the tropics indoors. Verdant Ochre Jungle Escape layers deep greens with warm ochre accents to create a grounded, nature-forward backdrop that elevates living rooms, bedrooms, nurseries, and creative spaces. This removable wallpaper delivers statement-making style with an effortless, renter-friendly approach.
Key Features
Removable wallpaper designed for easy installation and clean removal on most painted walls
Panels measure 24 inches wide and are available in heights up to 120 inches
PVC-free material printed with eco-friendly, water-based inks and low-odor technology
Rich, detailed print with a smooth, matte look that reduces glare
Ideal for accent walls, alcoves, and full-room makeovers
Size & Fit
Panel width: 24 in
Panel height options: up to 120 in
Measure wall height at multiple points and add 2–3 inches for trimming
To estimate quantity: wall width (inches) ÷ 24, then round up to the next whole panel
Hang panels side by side for a continuous look
Eco Conscious
PVC-free substrate for a safer home environment
Printed with water-based inks for reduced environmental impact
Low odor and free from harsh solvents
Surface & Room Guidelines
Best on smooth, clean, dry, and sound walls painted with eggshell, satin, or semi-gloss
Not recommended on heavy texture, high-sheen, or porous surfaces without proper priming
Allow fresh paint to cure for at least 30 days before installation
In humid areas, ensure good ventilation; avoid direct water spray
Always test a small area first
Care Instructions
Wipe gently with a soft, damp cloth
Use mild soap if needed; avoid bleach, abrasives, and solvent cleaners
Do not scrub aggressively or use steam
Installation Guidance
Unroll panels and let them relax flat for 24 hours.
Prep the wall: fill holes, sand bumps, and remove dust and grease.
Mark a plumb line for your first panel to ensure a straight start.
If self-adhesive: peel 6–12 inches of backing, align the top, and smooth downward with a felt squeegee, peeling more backing as you go.
If using paste-the-wall: apply a thin, even coat of clear, strippable adhesive per manufacturer instructions; hang and smooth.
Butt the next panel edge-to-edge; do not overlap. Match the design carefully.
Trim excess at ceiling, baseboards, and around outlets with a sharp blade.
Maintain room temperature between 60–80°F during and after install.
To remove, lift a corner and peel back slowly at a low angle; warm gently with a hair dryer if needed.
Create your lush retreat with Verdant Ochre Jungle Escape—PVC-free, water-based ink printing, and designed for beautiful results.
