Verdant Ochre Jungle Escape

Verdant Ochre Jungle Escape

Bring the lush calm of the tropics indoors. Verdant Ochre Jungle Escape layers deep greens with warm ochre accents to create a grounded, nature-forward backdrop that elevates living rooms, bedrooms, nurseries, and creative spaces. This removable wallpaper delivers statement-making style with an effortless, renter-friendly approach.

Key Features

• Removable wallpaper designed for easy installation and clean removal on most painted walls
• Panels measure 24 inches wide and are available in heights up to 120 inches
• PVC-free material printed with eco-friendly, water-based inks and low-odor technology
• Rich, detailed print with a smooth, matte look that reduces glare
• Ideal for accent walls, alcoves, and full-room makeovers

Size & Fit

• Panel width: 24 in
• Panel height options: up to 120 in
• Measure wall height at multiple points and add 2–3 inches for trimming
• To estimate quantity: wall width (inches) ÷ 24, then round up to the next whole panel
• Hang panels side by side for a continuous look

Eco Conscious

• PVC-free substrate for a safer home environment
• Printed with water-based inks for reduced environmental impact
• Low odor and free from harsh solvents

Surface & Room Guidelines

• Best on smooth, clean, dry, and sound walls painted with eggshell, satin, or semi-gloss
• Not recommended on heavy texture, high-sheen, or porous surfaces without proper priming
• Allow fresh paint to cure for at least 30 days before installation
• In humid areas, ensure good ventilation; avoid direct water spray
• Always test a small area first

Care Instructions

• Wipe gently with a soft, damp cloth
• Use mild soap if needed; avoid bleach, abrasives, and solvent cleaners
• Do not scrub aggressively or use steam

Installation Guidance

1. Unroll panels and let them relax flat for 24 hours.
2. Prep the wall: fill holes, sand bumps, and remove dust and grease.
3. Mark a plumb line for your first panel to ensure a straight start.
4. If self-adhesive: peel 6–12 inches of backing, align the top, and smooth downward with a felt squeegee, peeling more backing as you go.
5. If using paste-the-wall: apply a thin, even coat of clear, strippable adhesive per manufacturer instructions; hang and smooth.
6. Butt the next panel edge-to-edge; do not overlap. Match the design carefully.
7. Trim excess at ceiling, baseboards, and around outlets with a sharp blade.
8. Maintain room temperature between 60–80°F during and after install.
9. To remove, lift a corner and peel back slowly at a low angle; warm gently with a hair dryer if needed.

Create your lush retreat with Verdant Ochre Jungle Escape—PVC-free, water-based ink printing, and designed for beautiful results.