Sculpted Concrete Facade
Sculpted Concrete Facade
Wallpaper Calculator
Dimensions in inches.
You will need:
0 rolls
Couldn't load pickup availability
Sculpted Concrete Facade
Bring the textured depth of urban architecture to your spaceβwithout the dust or permanence. Sculpted Concrete Facade is a premium, removable wallpaper that captures the look of hand-formed concrete in a soft, modern palette. Printed on PVC-free material with eco-friendly, water-based inks, itβs a design-forward choice for renters, nurseries, offices, and any room that needs refined character.
Key Features
- Elevated concrete-look design with sculpted depth and subtle tonal variation
- Removable and repositionable for stress-free updates
- PVC-free substrate printed with eco-friendly, water-based inks
- Low-odor, suitable for homes and workspaces
- Each roll is 24 inches wide and available up to 120 inches high
- Matte finish minimizes glare and enhances realism
- Made for smooth, non-textured, properly painted walls
Sizing
Order the number of 24-inch-wide panels you need for your wall width. Choose the panel height that best matches your wall (up to 120 inches). We recommend adding a small margin to your height selection to allow for trimming at the ceiling and baseboard.
Whatβs Included
- Self-adhesive, removable wallpaper roll(s) at your selected height (24 inches wide)
- Printed alignment marks for easy pattern matching
- Quick-start installation guide
Installation Guidance
- Prepare the wall: Ensure itβs smooth, clean, dry, and fully cured (wait at least 30 days after painting).
- Plan your layout: Mark a straight plumb line for the first panel using a level.
- Peel and place: Start at the top, peel back 6β10 inches of the backing, align to your plumb line, and apply.
- Smooth as you go: Use a felt squeegee or soft cloth to press out air and ensure full contact.
- Match the pattern: Install subsequent panels edge-to-edge, gently repositioning as needed for a seamless look.
- Trim: Use a sharp utility knife to trim excess at ceilings, baseboards, and around fixtures.
Care & Removal
- Wipe clean with a soft, damp cloth; avoid abrasives and harsh chemicals.
- For best results, dust regularly to maintain a crisp, concrete-like finish.
- To remove, lift a corner and peel back slowly at a 180Β° angle. Adhesive is designed to remove cleanly from properly prepared walls.
Good to Know
- Not recommended for textured walls, high-humidity areas without ventilation, or surfaces painted with low-VOC βstain-blockingβ paints that may hinder adhesion.
- Color may vary slightly by batch; order all panels needed for a project together.
- Test a small area if unsure about paint compatibility.
Shipping & Returns
Material
Disclaimer
Share



EASY TO INSTALL
Enjoy a surprisingly simple installation of Sculpted Concrete Facade
PEEL AND STICK
Sculpted Concrete Facade is made of peel and stick material. Each panel is 24 in wide
CUSTOM WALL SIZE
Sculpted Concrete Facade is fully customizable to your wall's dimensions. Specify the exact size and cropping for a perfect fit.
ECO-FRIENDLY
Sustainably produced with eco-friendly inks and PVC-free material for a healthier home.

Blog
More Than Just a Pretty Pattern: Why Wallpaper is the Design Upgrade Your Home is Craving