Sculpted Concrete Facade

Sculpted Concrete Facade

Bring the textured depth of urban architecture to your space—without the dust or permanence. Sculpted Concrete Facade is a premium, removable wallpaper that captures the look of hand-formed concrete in a soft, modern palette. Printed on PVC-free material with eco-friendly, water-based inks, it’s a design-forward choice for renters, nurseries, offices, and any room that needs refined character.

Key Features

• Elevated concrete-look design with sculpted depth and subtle tonal variation
• Removable and repositionable for stress-free updates
• PVC-free substrate printed with eco-friendly, water-based inks
• Low-odor, suitable for homes and workspaces
• Each roll is 24 inches wide and available up to 120 inches high
• Matte finish minimizes glare and enhances realism
• Made for smooth, non-textured, properly painted walls

Sizing

Order the number of 24-inch-wide panels you need for your wall width. Choose the panel height that best matches your wall (up to 120 inches). We recommend adding a small margin to your height selection to allow for trimming at the ceiling and baseboard.

What’s Included

• Self-adhesive, removable wallpaper roll(s) at your selected height (24 inches wide)
• Printed alignment marks for easy pattern matching
• Quick-start installation guide

Installation Guidance

1. Prepare the wall: Ensure it’s smooth, clean, dry, and fully cured (wait at least 30 days after painting).
2. Plan your layout: Mark a straight plumb line for the first panel using a level.
3. Peel and place: Start at the top, peel back 6–10 inches of the backing, align to your plumb line, and apply.
4. Smooth as you go: Use a felt squeegee or soft cloth to press out air and ensure full contact.
5. Match the pattern: Install subsequent panels edge-to-edge, gently repositioning as needed for a seamless look.
6. Trim: Use a sharp utility knife to trim excess at ceilings, baseboards, and around fixtures.

Care & Removal

• Wipe clean with a soft, damp cloth; avoid abrasives and harsh chemicals.
• For best results, dust regularly to maintain a crisp, concrete-like finish.
• To remove, lift a corner and peel back slowly at a 180° angle. Adhesive is designed to remove cleanly from properly prepared walls.

Good to Know

• Not recommended for textured walls, high-humidity areas without ventilation, or surfaces painted with low-VOC “stain-blocking” paints that may hinder adhesion.
• Color may vary slightly by batch; order all panels needed for a project together.
• Test a small area if unsure about paint compatibility.