Apex Geometric Construct

Apex Geometric Construct

Elevate your space with Apex Geometric Construct, a modern removable wallpaper that blends crisp lines and bold symmetry. Designed for renters and renovators alike, this peel-and-stick wall covering refreshes rooms without the commitment of traditional paste. Each roll is 24 inches wide and available in heights up to 120 inches for a custom, floor-to-ceiling fit.

Key Features

• Removable & renter-friendly: Peel-and-stick application with clean removal on most painted surfaces.
• PVC-free & eco-conscious: Printed with eco-friendly, water-based inks for low odor and a healthier home environment.
• Custom height: Choose panel heights up to 120 inches to match your wall and trim in place for a perfect edge.
• Repositionable during install: Align patterns with ease and smooth away bubbles as you go.
• Vivid, crisp print: Sharp geometric detail designed to make a statement in living rooms, bedrooms, offices, and entryways.
• Made to order: Produced on demand to reduce waste and ensure fresh, consistent color.

Fit & Measuring

• Each panel is 24 inches wide. Measure your wall width and divide by 24, then round up to the next whole number of panels.
• Measure wall height and select the panel height that meets or slightly exceeds your wall; trim the excess for a clean finish.
• For pattern consistency, order all panels for a project at the same time.

Installation Guidance

1. Prep the surface: Ensure walls are smooth, clean, dry, and fully cured (allow new paint to cure for at least 30 days). Remove dust and switch plates.
2. Plan your layout: Mark a plumb line to keep the first panel perfectly vertical.
3. Peel & stick: Peel 6–12 inches of backing and adhere the top of the panel, then smooth downward with a felt squeegee or soft cloth.
4. Align the pattern: Butt seams edge-to-edge without overlap, adjusting as needed to match the geometric design.
5. Finish & trim: Continue peeling the backing while smoothing. Trim excess at ceilings, baseboards, and around outlets with a sharp blade and straightedge.
6. Final check: Smooth out any remaining bubbles toward the edges. Lift and reapply if needed—our film allows gentle repositioning during install.

Surface Compatibility

• Best on smooth, non-textured interior walls painted with standard eggshell, satin, or semi-gloss finishes.
• Also suitable for primed drywall, glass, sealed wood, and metal.
• Not recommended for heavy texture, unsealed surfaces, high-humidity zones, or low/zero-VOC and stain-resistant paints that may reduce adhesion. When in doubt, test a sample first.

Care & Maintenance

• Wipe gently with a soft, damp cloth; mild soap as needed.
• Avoid abrasives, solvents, and excessive moisture or steam.
• Use a clean, sharp blade for any future edge touch-ups.

Sustainability

All our wallpapers are PVC-free and printed with eco-friendly, water-based inks. Made-to-order production helps minimize waste while delivering fresh, vibrant color every time.

Good to Know

• Colors may vary slightly from screen to print; order together to ensure batch consistency.
• For best results, allow paint to fully cure and test adhesion in an inconspicuous area.