Artisan's Prismatic Color Weave

Artisan's Prismatic Color Weave

Transform your space with Artisan's Prismatic Color Weave, a removable peel-and-stick wallpaper that blends vibrant, interlaced hues into a refined woven effect. Ideal for accent walls, rentals, nurseries, and creative home updates, this modern pattern adds movement and warmth without permanent commitment. Printed on a premium, PVC-free material with eco-friendly, water-based inks.

Key features

• Removable and renter-friendly: Peel-and-stick application designed for clean removal from most painted, primed walls.
• Eco-conscious: 100% PVC-free substrate printed with water-based inks; low-odor and home-safe.
• Size options: Each roll is 24 inches wide and available in lengths up to 120 inches to match your wall height.
• Refined finish: Smooth, matte surface reduces glare and enhances the prismatic weave detail.
• DIY-friendly: Repositionable during install; trim-to-fit for ceilings, baseboards, and corners.
• Versatile style: Subtle color interplay complements modern, eclectic, and minimalist interiors.

Care and maintenance

• Wipe clean with a soft, damp cloth; use mild, non-abrasive soap if needed.
• Avoid bleach, solvents, and vigorous scrubbing to preserve print quality.
• Use in low- to moderate-moisture areas; ensure good ventilation in bathrooms.

Installation guidance

1. Acclimate: Unroll and lay flat for 24 hours indoors before installing.
2. Prep walls: Surface must be smooth, clean, and dry. Repair imperfections, remove dust, and ensure paint is fully cured (typically 30 days). Avoid heavy texture or freshly painted walls.
3. Plan and measure: Each panel is 24 inches wide. Measure your wall width and divide by 24 to determine the number of panels; add extra for trimming and pattern alignment.
4. Start plumb: Mark a vertical level line where your first panel will go for perfectly straight application.
5. Apply: Peel 6–8 inches of backing from the top, align to your plumb line, then smooth downward with a felt squeegee while removing the backing. Lift and reposition as needed.
6. Seams: Butt panels edge-to-edge without overlap. Smooth firmly to minimize visible seams.
7. Trim: Use a sharp blade and straightedge to trim at ceilings, baseboards, and around fixtures. Turn off power before trimming near outlets.
8. Removal: Lift a top corner and peel back slowly at a low angle. Apply gentle heat with a hair dryer if needed to soften the adhesive.

Color note: Screen colors vary. For the best match in your lighting, consider ordering a sample before a full project.

Material and inks: Always PVC-free and printed with eco-friendly, water-based inks.