Artisan's Reclaimed Brick Wall

Artisan's Reclaimed Brick Wall — Removable Wallpaper

Bring the warmth and character of timeworn masonry into your space with Artisan's Reclaimed Brick Wall. This removable wallpaper delivers the depth and texture of aged brick in a renter-friendly format, printed on premium, PVC-free material with eco-friendly, water-based inks.

Why you’ll love it

• Authentic reclaimed-brick look adds industrial charm and cozy, lived-in character.
• Renter-friendly and removable for easy updates without damage when properly installed on suitable surfaces.
• PVC-free substrate printed with eco-friendly, water-based inks.
• Low-sheen finish designed to reduce glare and enhance the realistic brick detail.
• Each roll is 24 inches wide and available in heights up to 120 inches for a tailored fit.
• Seamable panels for a cohesive, edge-to-edge brick pattern across your wall.

Sizing and coverage

Rolls measure 24 inches wide and up to 120 inches high. Measure your wall height to select the correct roll height, then calculate how many rolls you need to span the width of your wall.

1. Measure the total wall width in inches.
2. Divide by 24 to determine the number of rolls required (round up).
3. Consider ordering an extra roll for pattern alignment and trimming.

Installation guidance

1. Prepare the surface: Walls should be clean, smooth, dry, and sound. Remove dust, oils, and loose paint. Fill and sand imperfections. Ensure fresh paint is fully cured per the paint manufacturer.
2. Plan your layout: Snap a plumb line for the first panel to keep your pattern straight from top to bottom.
3. Apply the first roll from the top of the wall, aligning to the plumb line, and smooth downward as you go to remove bubbles.
4. Butt subsequent seams edge-to-edge without overlapping, matching the brick pattern.
5. Use a smoothing tool and light, even pressure to set each panel.
6. Trim excess at ceilings, baseboards, and around outlets with a sharp utility knife.
7. Allow the installation to rest and inspect seams; lightly resmooth if needed.

Best results are achieved on smooth, painted walls (eggshell or satin). Not recommended on heavy texture, raw plaster, unsealed wood, or surfaces with moisture or grease.

Care and removal

• Dust regularly with a dry microfiber cloth.
• Spot clean with a damp cloth and mild, non-abrasive soap; avoid bleach, harsh chemicals, and scrubbing.
• To remove, gently lift a corner and peel back slowly at a low angle. If any residue remains, wipe with warm, soapy water.

Good to know

• PVC-free and printed with eco-friendly, water-based inks for a cleaner indoor choice.
• Order all rolls for a project at the same time to ensure consistent color across panels.
• Color may vary slightly from screen to wall due to monitor settings and lighting.