Charcoal Slate Ledge Wall
Charcoal Slate Ledge Wall
Wallpaper Calculator
Dimensions in inches.
You will need:
0 rolls
Couldn't load pickup availability
Charcoal Slate Ledge Wall
Bring the cool sophistication of stacked stone to your space—without the weight, mess, or permanence. Charcoal Slate Ledge Wall is a removable wallpaper designed to mimic natural slate in deep charcoal tones, adding depth, texture, and modern character to living rooms, bedrooms, entryways, and feature walls.
Every roll is PVC-free and printed with eco-friendly, water-based inks for a low-odor, indoor-safe finish you can feel good about.
Key Features
- Realistic charcoal slate ledge design with rich detail and a soft, matte finish
- Removable and renter-friendly for an easy style refresh without wall damage
- PVC-free substrate printed with eco-friendly, water-based inks
- Each roll is 24 inches wide and available in heights up to 120 inches
- Works best on smooth, clean, properly primed and painted walls
- Low-odor, durable print that wipes clean
What’s Included
- 1 removable wallpaper roll, 24 in wide x your selected height (up to 120 in)
- Simple installation guide
Sizing & Coverage
- Roll width: 24 in (61 cm)
- Roll height: select up to 120 in (305 cm) to suit your wall
- To estimate quantity: measure your wall width in inches and divide by 24, then round up and add 1 extra roll for trimming and pattern alignment.
Installation Guidance
- Prepare the surface: Walls must be smooth, clean, dry, and fully cured (allow freshly painted walls to cure for at least 30 days).
- Plan your layout: Mark a plumb vertical line for your first roll. Unroll and check panel order for pattern flow.
- Apply and smooth: Starting at the top, align the edge with your plumb line and smooth downward with a felt squeegee, working out air bubbles as you go.
- Match and butt seams: Install subsequent rolls edge-to-edge (do not overlap) and align the slate pattern.
- Trim and finish: Use a sharp blade to trim along ceilings, baseboards, and outlets. Replace blades often for crisp cuts.
Tips: Two-person installation is recommended. Avoid installing on textured walls, high-moisture areas with frequent steam, or over stain-resistant/low-VOC paints that can affect adhesion. Always test a small area first.
Care Instructions
- Wipe gently with a soft, damp cloth; use mild soap if needed.
- Avoid abrasive scrubbers, harsh chemicals, or excessive moisture.
- To remove, peel slowly from a corner at a 180° angle. If resistance is felt, warm the area slightly and continue.
Note: Color may vary slightly by screen. For best results, order all rolls at the same time to ensure a consistent print run.
Shipping & Returns
Material
Disclaimer
Share



EASY TO INSTALL
Enjoy a surprisingly simple installation of Charcoal Slate Ledge Wall
PEEL AND STICK
Charcoal Slate Ledge Wall is made of peel and stick material. Each panel is 24 in wide
CUSTOM WALL SIZE
Charcoal Slate Ledge Wall is fully customizable to your wall's dimensions. Specify the exact size and cropping for a perfect fit.
ECO-FRIENDLY
Sustainably produced with eco-friendly inks and PVC-free material for a healthier home.

Blog
More Than Just a Pretty Pattern: Why Wallpaper is the Design Upgrade Your Home is Craving