Dino Buddies Forest Adventure

Dino Buddies Forest Adventure

Turn your child’s room into a playful prehistoric forest. Dino Buddies Forest Adventure features friendly dinosaurs wandering through leafy greenery—perfect for nurseries, kids’ rooms, and imaginative play spaces. This peel-and-stick, removable wallpaper installs cleanly, removes easily, and brings instant joy to any wall.

Key Features

• Removable and renter-friendly: Peel-and-stick application with clean, damage-free removal.
• Eco-conscious: PVC-free material printed with eco-friendly, water-based inks.
• Sized for real rooms: Rolls are 24 inches wide and available in heights up to 120 inches.
• Seamless look: Precision print for smooth pattern alignment along panel edges.
• Soft, matte finish: Reduces glare and enhances detail for a premium look.
• Designed for smooth surfaces: Best on clean, dry, non-textured, well-painted walls.

Sizing & Coverage

Measure your wall height and choose the panel height up to 120 inches. Each roll covers 24 inches in width. For a neat, professional finish, allow an extra 2–4 inches in height for trimming at the ceiling and baseboard.

• Example: A 10-foot (120-inch) wall height uses a 120-inch panel.
• To cover an 8-foot-wide wall, you’ll need four 24-inch panels.

Installation Guidance

What you’ll need: measuring tape, level, pencil, clean cloth, smoothing tool or squeegee, and a sharp utility knife.

1. Prepare the wall: Ensure it’s smooth, clean, and fully dry. Fresh paint should be fully cured (typically 30 days).
2. Plan the layout: Mark a straight vertical guide with a level for your first panel.
3. Peel and position: Peel back 8–12 inches of the backing, align the top of the panel, and stick lightly.
4. Smooth as you go: Work downward, peeling more backing while smoothing from the center outward to remove air bubbles.
5. Match the pattern: Align the next panel edge-to-edge (butt seam) for a seamless repeat.
6. Trim excess: Use a sharp knife along ceiling, baseboards, and outlets.
7. Adjust if needed: Gently lift and reposition to perfect alignment.

Surface notes: Not recommended for heavy texture, high humidity directly without ventilation, or walls coated with stain-resistant or low-VOC/“scrubbable” paints that may resist adhesion. Always test adhesion on a small area first.

Care Instructions

• Wipe gently with a soft, damp cloth; use mild soap if needed.
• Avoid abrasive scrubbers, harsh chemicals, or excessive soaking.
• To remove, slowly peel from a corner at a 180° angle; use gentle warmth if needed to release adhesive.

Good to Know

• PVC-free and printed with eco-friendly, water-based inks.
• Ideal for nurseries, playrooms, and kids’ bedrooms.
• Matte finish minimizes glare and enhances artwork detail.
• Colors may vary slightly due to screen settings and lighting.