Earthy Slate Ledge Wall

Earthy Slate Ledge Wall

Bring the grounded beauty of natural stone to your space—without heavy materials or contractors. Earthy Slate Ledge Wall is a removable wallpaper that recreates the depth and warmth of stacked slate in a soft, matte finish. Designed for renters and refreshers alike, it installs cleanly and removes with ease. All of our wallpapers are PVC-free and printed with eco-friendly, water-based inks.

Key Features

• Authentic slate ledge look in warm, earthy tones for organic texture and dimension.
• Removable and renter-friendly; aligns edge-to-edge for a seamless, professional finish.
• PVC-free material printed with eco-friendly, water-based inks.
• Custom length: each roll is 24 inches wide with heights up to 120 inches.
• Low-sheen, matte surface minimizes glare and enhances realism.

Sizing & Coverage

Each roll measures 24 in wide by your chosen length (up to 120 in high). Measure your wall width and divide by 24 inches to determine how many rolls you need. Add 10% for trimming and pattern alignment.

Surface Compatibility

• Best on smooth, clean, dry, and painted walls (eggshell, satin, or semi-gloss finishes perform best).
• Allow fresh paint to cure 2–4 weeks before installation.
• Not recommended for textured surfaces, brick, stucco, or areas with heavy moisture or direct splashes.
• Always test a sample if walls were painted with stain-resistant, low-VOC, or scrubbable paints.

Installation Guidance

1. Prep: Wipe walls with mild soap and water; let dry fully. Remove outlet covers and switch plates.
2. Plan: Mark a plumb line for your first panel. Lay out panels to understand pattern flow.
3. Apply: Starting at the top, peel 6–8 inches of backing and adhere. Smooth downward with a squeegee, peeling more backing as you go.
4. Align: Butt seams gently without overlap, adjusting to match the slate pattern.
5. Trim: Use a sharp blade along ceilings, baseboards, and around fixtures. Work with a partner for best results.

Care & Removal

• Wipe with a soft, damp cloth; avoid abrasives and harsh chemicals.
• To remove, lift a corner and peel back slowly at a low angle. Warm with a hair dryer if needed.
• Store unused panels flat and out of direct sunlight.

Good to Know

• Order all rolls for a project at the same time to ensure the closest color match.
• Sample first to verify color, finish, and adhesion on your specific wall.