Faceted Concrete Shadow Play

Faceted Concrete Shadow Play

Architectural depth meets soft industrial charm. Faceted Concrete Shadow Play layers geometric angles and tonal concrete textures to create a sophisticated play of light and shadow—perfect for modern living rooms, serene bedrooms, creative offices, and entryways.

Printed on premium, removable wallpaper that’s PVC-free and made with eco-friendly, water-based inks, this design refreshes your space with style you can feel good about.

Key Features

• Removable and renter-friendly; designed to come down cleanly from most properly prepared, painted walls
• PVC-free material printed with water-based, low-odor inks
• Rolls are 24 inches wide; choose heights up to 120 inches for a tailored fit
• Modern faceted pattern creates depth and a refined, concrete-inspired look
• Ideal for smooth, non-textured walls; easy to align for a seamless finish

Size & Coverage

• Each roll: 24 inches wide x your selected height (up to 120 inches)
• Ordering tip: measure your wall width and divide by 24 inches to estimate the number of rolls
• Add 1–2 inches to your height selection for trimming at the ceiling and baseboard

Care Instructions

• Wipe clean with a soft, damp cloth; mild soap if needed
• Avoid harsh cleaners, bleach, and abrasive pads
• For best longevity, avoid installation in areas with heavy texture or persistent steam
• Test a sample on your wall to confirm color, finish, and adhesion

Installation Guidance

1. Prep the wall: ensure it is smooth, clean, dry, and fully cured (fresh paint should cure for at least 30 days). Remove dust and switch plates.
2. Plan your layout: use a level to draw a light plumb line where your first 24-inch panel will go.
3. Apply the first panel: peel back 6–12 inches of the liner, align the top, and smooth downward with a squeegee or soft cloth.
4. Work panel by panel: butt edges gently (do not overlap) and smooth from the center outward to remove bubbles.
5. Trim excess at ceiling, baseboards, and around outlets with a sharp blade.
6. To remove: peel slowly from a top corner at a low angle. If resistance occurs, warm gently and proceed.

Note: Surface conditions vary. Always test a sample first for best results.