Gilded Filigree Bloom

Ornate and airy, Gilded Filigree Bloom brings a refined, botanical flourish to any room. Delicate scrollwork and graceful blooms create a softly gilded look that elevates living rooms, bedrooms, nurseries, entryways, and more—all with the ease of removable wallpaper.

Each roll arrives in panels that are 24 inches wide and available in heights up to 120 inches, making it simple to tailor your coverage to your space. Our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a beautiful finish you can feel good about.

Key Features

• Removable and renter-friendly
• PVC-free substrate with water-based inks
• Panels measure 24 in W x your chosen height (up to 120 in H)
• Repositionable during installation
• Designed for smooth, properly painted walls

Sizing & Measuring

• Measure your wall height and select the panel height that meets or slightly exceeds it (up to 120 in).
• Calculate the number of panels by dividing your wall width (in inches) by 24, then round up.
• For multi-wall or wrap-around installs, measure each span separately.

Installation Guidance

1. Prepare the surface: Walls must be smooth, clean, dry, and fully cured (paint cured for at least 30 days). Avoid low-VOC, stain-resistant, or Teflon-infused paints where adhesion may be reduced.
2. Plan your layout: Mark a straight, plumb line to start your first panel.
3. Apply the first panel: Align the top, then smooth downward, working from the center out to remove air bubbles.
4. Add remaining panels: Install edge-to-edge (butt seams) for a seamless pattern match. Smooth as you go.
5. Trim: Use a sharp blade to trim any excess at ceilings, baseboards, and around outlets.
6. Allow the adhesive to set: Avoid heavy cleaning or high humidity for 24 hours.

Care & Removal

• Wipe gently with a soft, damp microfiber cloth as needed.
• Avoid abrasive scrubbers, bleach, or solvent-based cleaners.
• To remove, peel slowly from a top corner at a low angle. Residue is minimal when walls are properly prepared.

Note: Best results on smooth, eggshell-to-satin painted walls. Not recommended for textured surfaces or areas with direct water contact.