Gilded Plumes in Twilight

Gilded Plumes in Twilight

Elevate your space with a removable wallpaper that blends modern elegance with poetic texture. Gilded Plumes in Twilight features sweeping feather-inspired motifs that glow against deep, dusk-like tones—creating a statement wall that feels both luxurious and serene. Printed on premium, PVC-free material with eco-friendly, water-based inks, this wall covering is designed for stylish homes that care about healthier indoor air and beautiful design.

Key Features

• Removable wallpaper ideal for renters and renovators seeking dramatic impact without a permanent commitment.
• PVC-free substrate printed with eco-friendly, water-based inks.
• Rich, feather-inspired pattern that adds depth and sophistication from entryways to bedrooms and dining rooms.
• Smooth, durable finish suitable for most flat, properly painted interior walls.
• Low-maintenance surface that’s easy to clean and care for.

Sizing

• Each roll is 24 inches wide and available in heights up to 120 inches.
• Coverage example: a 24 in x 120 in roll covers approximately 20 sq ft.
• Select the height closest to your wall; allow for trimming at the top and bottom.
• For best results, plan for about 10% extra material to account for alignment and trimming.

Installation Guidance

1. Prepare the wall: Ensure it is smooth, clean, dry, and fully cured (wait at least 30 days after fresh paint). Remove dust and switch plates.
2. Measure and mark: Use a level to draw a light plumb line to guide your first panel.
3. Start at the top: Align the first roll with the plumb line. Work from top to bottom, smoothing as you go to remove air bubbles.
4. Smooth and align: Use a wallpaper smoothing tool or soft cloth, pressing from the center outward. Butt edges carefully for a near-seamless look.
5. Trim excess: With a sharp utility knife, trim along ceilings, baseboards, and around outlets.
6. Repeat: Hang remaining rolls edge-to-edge, maintaining pattern alignment.

Tip: Test a small offcut on your wall to confirm adhesion and surface compatibility before full installation.

Care Instructions

• Wipe gently with a soft, damp cloth; avoid harsh scrubbing.
• Use mild, non-abrasive cleaners only; do not soak.
• Avoid prolonged exposure to direct moisture; ensure proper ventilation in bathrooms.

Good to Know

• Best for smooth, sealed, and non-textured interior walls.
• Not recommended on textured surfaces, high-sheen or stain-resistant paints, or walls with moisture issues.
• Removal is clean on most properly prepared walls; peel slowly at a 180° angle.