Gilded River on Slate Mural

Make a statement with flowing golden tones over a deep slate backdrop. The Gilded River on Slate Mural brings modern-organic movement to feature walls, bedrooms, living rooms, and creative workspaces—designed as a removable wallpaper for effortless transformation.

Key Features

• Removable, renter-friendly mural wallpaper for easy refreshes
• All our wallpapers are PVC-free and printed with eco-friendly, water-based inks
• Matte, premium finish for a refined, glare-free look
• Each roll is 24 inches wide; select heights up to 120 inches to fit your wall
• Continuous mural artwork aligns across panels for a seamless wall-to-wall flow
• Low-odor print process; ideal for homes, rentals, and offices
• Best on smooth, clean, properly painted surfaces

What You Receive

• Wallpaper rolls/panels printed to your chosen height (up to 120 inches), each 24 inches wide
• Numbered panels for left-to-right mural alignment
• Simple installation guide

Sizing & Coverage

Order by wall height and total wall width:

1. Measure your wall height and choose the roll height that meets or slightly exceeds it (up to 120 inches).
2. Measure the total wall width and divide by 24 inches to get the number of rolls needed; round up to the next whole roll.
3. For full murals or if walls are out of square, add one extra roll for trimming and pattern alignment.

Example: A 10-foot (120-inch) wide wall requires 5 rolls at 24 inches each.

Installation Guidance

1. Unpack and allow panels to acclimate flat for 24 hours.
2. Prepare the wall: ensure it is smooth, clean, dry, and fully cured (fresh paint should cure at least 30 days). Remove dust and switch plates.
3. Mark a level plumb line where the first panel will install.
4. Starting at the top, peel back 6–12 inches of backing and align the panel to your plumb line.
5. Smooth downward and outward with a squeegee or soft cloth, peeling more backing as you go to avoid bubbles.
6. Butt-join the next panel edge-to-edge, matching the mural artwork. Do not overlap.
7. Trim excess at ceiling, baseboards, and around outlets with a sharp blade and straightedge.
8. For removal, gently warm the panel (optional) and peel back slowly at a low angle.

Note: Application is intended for smooth, non-textured, latex-painted walls. Adhesion and clean removal can vary with surface prep, paint type, and wall condition. Always test a small area first.

Care Instructions

• Wipe clean with a soft, damp cloth; mild soap as needed
• Avoid abrasives, bleach, and solvent cleaners
• Use gentle pressure on seams and edges
• Protect from prolonged direct moisture and steam; not recommended for high-splash zones

Style tip: Pair this mural with warm metallic accents, natural woods, and soft neutrals to echo its riverine flow and slate depth.