Gilded Teal Heritage Damask

Gilded Teal Heritage Damask

Description

Elevate your space with a timeless damask rendered in deep teal and luminous, gilded-inspired detailing. This removable wallpaper brings heritage elegance to modern interiors, offering a refined backdrop for living rooms, bedrooms, dining areas, and entryways. Crafted on a PVC-free substrate and printed with eco-friendly, water-based inks, it’s a beautiful, responsible choice for your home.

Key Features

• Classic damask pattern in rich teal with a subtle gilded look
• Removable, renter-friendly design for easy updates
• Simple peel-and-stick application; repositionable during install
• PVC-free material printed with eco-friendly, water-based inks
• Smooth, low-sheen finish for a refined, glare-free appearance
• Great for accent walls, full rooms, and built-ins

Size & Fit

• Roll width: 24 inches
• Available heights: up to 120 inches
• To estimate quantity: measure your wall width in inches and divide by 24, then round up to the next whole number of panels.
• Designed for edge-to-edge (butt) seams for a seamless look.

Installation Guidance

1. Prepare the surface: Install on smooth, clean, dry, and fully cured painted walls (allow new paint to cure for at least 30 days). Not recommended for heavy texture, brick, or surfaces painted with stain-resistant/low-adhesion coatings.
2. Plan your layout: Mark a plumb vertical line to guide your first panel. Remove switch plates and outlet covers.
3. Apply: Peel 6–12 inches of backing, align the top, and smooth downward with a felt squeegee or soft cloth, peeling backing as you go. Work from the center outward to release air.
4. Match the pattern: Butt edges gently—do not overlap. Adjust as needed; the adhesive allows light repositioning during install.
5. Trim: Use a sharp utility knife and straightedge to trim at ceilings, baseboards, and openings.
6. Removal: Peel slowly from a top corner at a low angle. Warm the surface slightly if needed to ease release.

Care Instructions

• Dust regularly with a dry microfiber cloth.
• Spot clean with a damp cloth and mild, non-abrasive soap; avoid harsh chemicals and bleach.
• Do not scrub; pat dry after cleaning.
• Avoid direct, prolonged moisture and high steam areas.

Note: Colors may vary slightly due to screen settings and lighting. For best results, install in consistent lighting and order enough panels for your full project width.