Golden Canyon Embrace

Golden Canyon Embrace

Invite the warmth of sunlit stone into your space. Golden Canyon Embrace is a removable wallpaper designed for effortless home decor refreshes—perfect for accent walls, entryways, bedrooms, and cozy reading corners. Printed on PVC-free material with eco-friendly, water-based inks, it delivers rich color with a soft, matte finish that’s beautiful, durable, and renter-friendly.

Key Features

• Removable and renter-safe: Designed to come down cleanly from properly prepared walls.
• Eco-conscious: 100% PVC-free substrate and printed with water-based inks.
• Premium look: Smooth, low-sheen finish that reduces glare and highlights fine detail.
• Sized for real walls: Each roll is 24 inches wide and available in heights up to 120 inches (10 ft) for a tailored fit.
• Seam-aware design: Printed for easy alignment from panel to panel.
• Versatile style: Warm canyon tones pair effortlessly with neutrals, woods, and modern metals.

Sizing & Coverage

Each roll covers 24 inches (2 ft) of wall width. To find how many rolls you need, measure your wall width in inches, divide by 24, and round up. Choose the roll height that matches your wall (up to 120 inches), then trim any excess at the ceiling and baseboard during installation.

Best on smooth, clean, painted walls. Avoid heavy texture, high-moisture areas (like inside showers), or fresh paint under 30 days.

Installation Guidance

1. Unbox and allow the wallpaper to acclimate flat for 24 hours.
2. Prep the wall: clean, dry, and fully cured paint (wait at least 30 days after painting). Remove dust and switch plates.
3. Mark a plumb vertical guideline where your first roll will go.
4. Apply the first roll carefully: align to the guideline and smooth from the center outward to remove air bubbles. For self-adhesive materials, peel the backing a little at a time; for paste-applied materials, follow your paste manufacturer’s directions.
5. Install remaining rolls edge-to-edge, aligning the pattern. Do not stretch the material; lightly lift and reposition as needed.
6. Trim excess at ceiling/baseboard with a sharp blade. For removal, slowly peel at a low angle; warm the material slightly if needed to ease release.

Care & Maintenance

• Wipe with a soft, damp cloth; mild soap if necessary.
• Avoid harsh chemicals, abrasives, and excessive scrubbing.
• Keep away from direct water spray and prolonged steam.

Crafted for conscious decorating: always PVC-free and printed with water-based inks.