Golden Hour Jungle Soar

Golden Hour Jungle Soar

Bring the glow of sunset into your space with Golden Hour Jungle Soar, a removable wallpaper that captures soaring birds and lush canopy silhouettes in warm, golden tones. Designed for renters and refreshers alike, this premium wall covering is PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-odor finish.

Key Features

• Removable and renter-friendly: Peel away cleanly from properly primed, smooth walls.
• PVC-free: Made without PVC or phthalates.
• Eco-conscious printing: Water-based, low-odor inks with a soft, matte look.
• Sized for easy planning: Rolls are 24 inches wide and available in heights up to 120 inches.
• Seamable design: Continuous pattern designed to align panel-to-panel.
• Versatile style: Tropical, botanical, and airy—perfect for living rooms, nurseries, bedrooms, and home offices.

Sizing and Coverage

• Each roll covers 24 inches in width.
• Choose the panel height that matches your wall (up to 120 inches). Select a slightly taller height to allow trimming at the ceiling and baseboard.
• How many panels do you need? Measure wall width in inches and divide by 24, then round up.
• Order all panels for a wall at the same time to ensure color consistency.

Installation Guidance

1. Prepare the surface: Walls should be smooth, clean, dry, and fully cured (paint cured for at least 30 days). Avoid high-texture, slick, or silicone/Teflon-coated paints.
2. Plan your layout: Snap a plumb line to start the first panel perfectly vertical.
3. Apply: Peel 6–12 inches of backing, align the top, and smooth downward with a felt or plastic squeegee, working from the center out to remove air.
4. Continue: Butt seams edge-to-edge. Slight overlap may help on uneven walls.
5. Trim: Use a sharp blade to trim at ceilings, baseboards, and around outlets.
6. Reposition as needed: Lift gently and reapply to fine-tune alignment.

Tip: Install in a dust-free room between 60–80°F (16–27°C). Two people make alignment easier.

Care Instructions

• Wipe with a soft, damp cloth; use mild soap if needed.
• Avoid abrasives, bleach, and solvent cleaners.
• Not recommended for areas with direct water spray or high heat/steam exposure.

Good to Know

• Best on smooth, properly primed walls with eggshell or satin finishes.
• Color can vary slightly by device screen and print run; order extra for pattern matching and future touch-ups.
• A sample swatch is recommended to test adhesion and color in your lighting.