Golden Rift on Marble

Golden Rift on Marble

Elevate your space with the refined look of marble traced by golden rifts. This removable, peel-and-stick wallpaper brings a luxe, stone-inspired finish to walls, backsplashes, furniture, and accent nooks—without the permanence or mess of traditional wallpaper.

Key Features

• Removable and repositionable: Easy to apply and cleanly remove from most smooth, painted surfaces.
• Eco-conscious: PVC-free material printed with eco-friendly, water-based inks.
• Premium look: Soft matte finish with a printed golden-veining effect (no metallic foils).
• Custom-fit panels: Each roll is 24 inches wide with selectable heights up to 120 inches.
• Seamless results: Designed for edge-to-edge alignment for a continuous pattern.
• Versatile use: Ideal for living rooms, bedrooms, rentals, offices, and feature walls.

How to Measure

1. Measure your wall height and choose the panel height that meets or slightly exceeds it (allow 1–2 inches for trimming).
2. Measure the wall width and divide by 24 inches to determine how many panels you need (round up to the next whole panel).
3. Order all panels at the same time for the best color continuity.

Installation Guidance

1. Prepare the surface: Apply to smooth, clean, dry, and fully cured paint (wait at least 30 days after painting). Wipe the wall with a damp, lint-free cloth and let dry.
2. Plan your layout: Mark a level vertical guideline for your first panel. Keep panels in sequence and maintain the same orientation.
3. Apply: Peel back 6–10 inches of the liner, align the top, and smooth downward with a felt squeegee or soft cloth while gradually removing the liner.
4. Seam: Butt edges gently edge-to-edge without overlap. Do not stretch the material; lift and readjust if needed.
5. Trim: Use a sharp utility knife to trim excess at ceilings, baseboards, and around outlets.

Tools recommended: tape measure, level, pencil, felt squeegee, sharp utility knife.

Care & Maintenance

• Wipe clean with a soft, damp cloth; use mild soap if needed.
• Avoid abrasives, bleach, and solvent-based cleaners.
• For removal, lift a corner and peel back slowly at a low angle.
• Suitable for well-ventilated spaces; apply only to non-textured, non-peeling surfaces.

Good to Know

• PVC-free substrate printed with eco-friendly, water-based inks.
• Not recommended for heavy texture, fresh paint under 30 days, or high-moisture areas with direct water contact.
• Color may vary slightly between print runs; order enough panels for your project at once.